30 B-type slot 8 double Extrusion Corner Bracket size drawing (PDF)

Datasheet — 30 B-type slot 8 double Extrusion Corner Bracket by Milo

Open the PDF
30 B-type slot 8 double Extrusion Corner BracketGet the CAD model30 B-type slot 8 double Extrusion Corner BracketCC-CORNBRKT-SZ-b8-double.pdf

Text of this datasheet

Extrusion corner bracket, per profile system, b8-double

Size drawing - b8-double values on the views - enlarged 2.5:1

Sym. Dimensi

L Leg length

Upright leg length

Wall thickness

res |

Hole diameter

Number of holes

Key height

Hole row on the first leg

Hole row on the upright leg

ey Hole column from the side

py Hole column spacing

Source levels

Main value = the modeled value (nominal, else the middle of min-max).

Grey under a value = its min-max, where the source gives both.

< / = = the source gives only that limit, modeled at it. ref = reference.

L2 = the standard itself (or its complete free preview, or the maker's drawing). L1 = two or more independent sources agree: the release gate.

LO = one source only: printed amber and marked *.

c = a source value was corrected; the datasheet says how.

House convention = a detail no source dimensions, drawn to a stated house rule.

This size's values: LO 11.

Notes

No published standard: each value the reference maker's drawing, single source (ADR 0034). Side walls, keys' width and length, fillet and mark are illustrative: sheet DO2.

TITLE

'? CommunityCAD Size drawing, b8-double

STANDARDS FOLLOWED FAMILY / DETAIL No published standard (makers' drawings) Extrusion corner bracket - b8-double

SHEET REV SCALE PROJECTION UNITS

CC-CORNBRKT-SZ-b8-double |A 25:1 & Dimensions in mm SPEC VERSION LICENSE PAGE 304229b833a653b73db51178a38d40486ee7c356b CC-BY 4.0 IronPixel Labs LLC 1/1

Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.