'?) CommunityCAD
CC-CORNBRKT-DS-b8-double rev A Size datasheet - b8-double
30 B-type slot 8 double corner bracket
Size datasheet: this size's values with their levels, conventions and sources.
aN
b8-double, face, 0.5:1 b8-double, side, 0.5:1 (hidden lines dashed) Sym. Dimension L Leg length h Upright leg length w Width t Wall thickness d Hole diameter n Number of holes k Key height ex Hole row on the first leg ez Hole row on the upright leg ey Hole column from the side py Hole column spacing
For 30 B-type slot 8 aluminium extrusions Part key extrusion-corner-brackets-b8- double Files 1 STEP AP214 (simplified) Value Level 30x Lo +1 30x Lo +1 50x Lo +1 G.5* Lo-1 6.2% Lo-1 Gx Lo-1 1* Lo +1 18x Lo +1 15% Lo +1 10x Lo +1 30x Lo +1
Modeled value: nominal, else the midpoint of min-max. < / 2: only that limit is given. * amber: one source (LO). c: a source value was corrected.
Level - independent sources.
No published standard (makers' drawings) Extrusion corner bracket - b8-double - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
Page 1/2
spec 3c4229b833a653b73db51178a38d40486ee7c36b
---
* CC-CORNBRKT-DS-b8-double rev A '?) CommunityCAD Size datasheet - b8-double
Conventions
« Casting: Side walls of the wall thickness, an inside fillet, key width and length and, on the slot 10 and 45 brackets, a curved diagonal: illustrative, not any maker's design.
« Mark: The CommunityCAD mark recessed 0.3 mm in an outside side wall. Illustrative.
« Values: No published standard: every maker casts its own bracket, so each size is the reference maker's own casting (Misumi, OpenBuilds, item), single source. item's sheets give only the outline and holes: its wall and key are house proportions, its hole ISO 273 medium for M8. On the 20 B-type slot 6 double, Misumi's drawing alone shows which holes sit on its rows. The two readings disagreed, and the owner accepted this layout: 4 holes on the first leg in two rows, 2 on the upright in one, no centre column.
« \V-slot holes: OpenBuilds' drawing gives the holes of the 20 V-slot bracket no position, so they sit at the middle of the leg and of the width, a rule rather than a maker's dimension.
¢ Finish: Cast aluminium, the reference part's finish: render and metadata only. First leg's profile face at Z = 0, the upright's at X = 0, the keys beyond them.
Sources Source Publisher Retrieved sha256 misumi-cast-brackets MISUMI 2026-10-30 7b0132a5b737 (kept outside the repo)
The whole series (verification map, corrections, drawings): CC-CORNBRKT-DS.
No published standard (makers' drawings) Page 2/2 Extrusion corner bracket - b8-double - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC spec 304229b833a653b73db51178a38d40486ee7c36b
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
