ISO 2936 hexagon socket screw key (hex key), s 3
Size drawing - s 3 values on the views - enlarged 2:1
2.98 2.96-3.00
Width across flats (the size)
3.35 3.31-3.39
Width across corners
66
Long arm, standard
93 89-93
Long arm, long (-L)
129 125-129
r= 3(s max) Long arm, extra-long (-XL)
12 Short arm ay
Source levels
Main value = the modeled value (nominal, else the middle of min-max). Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing).
L1 = two or more independent sources agree: the release gate.
LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L2 10.
Notes
Sizes are the width across flats s; the standard arm is drawn, -L and -XL differ in 11. Grey under a length: its limits (nominal plus Table 1's deviations).
r = s max, the bend's inner radius; the bend is 90° (ADR 0102, not tabled). Section and ends are house conventions, sheet D02.
TITLE
'? CommunityCAD Size drawing, s 3
STANDARDS FOLLOWED FAMILY / DETAIL
ISO 2936:2014 Hexagon socket screw key -s 3 SHEET REV SCALE PROJECTION UNITS CC-1802936-SZ-3 A 2:1 € Dimensions in mm SPEC VERSION LICENSE PAGE 38961b18cdce81745e7c92eee15d7chafe461574 CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.