'?) CommunityCAD CC-1$02341-DS-3 rev A
Size datasheet - 03
ISO 2341 @3 clevis pin with head, types A and B
Size datasheet: this size's values with their levels, its lengths, conventions and sources.
Diameter Shank @3; head @5 x 1
mm Lengths 13 generated, | = 6-30 Files 26 STEP AP214 (types A
and B, one detail level)
@3 x 20, type B, front view, 2.5:1
Sym. Dimension Value Level d Shank diameter (h11) 3 L1- 3 dk Head diameter (h14) 5 L1- 3 k Head height (js14) 1 La - 3 e Head chamfer, axial length 0.5 ref 1-3 r Underhead fillet radius 0.6 L1- 2 ic End chamfer, axial length, max <1 L1- 3 di Split-pin hole, type B (H13) 0.8 L1 + 3 le Hole axis to free end, type B, min >1.6 L1- 3 B Head chamfer angle from the axis, deg 45 refx LO: 1 a End chamfer angle from the axis, deg 30 refx lo: 1
Modeled value: nominal, else the midpoint of min-max. ref: reference value. * amber: one source (LO). Level - independent sources.
ISO 2341:1986 Page 1/2 Clevis pin - @3 - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC spec e79bc69c722a7450eb0be681b46a36c48d05506e
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
---
CC-1S802341-DS-3 revA Size datasheet - 03
'?) CommunityCAD
Lengths
| Thread Part key
6 built, AandB - - is02341-a-d3x6 - iso2341-b-d3x6
8 built, AandB - - is02341-a-d3x8 - iso2341-b-d3x8 10 built, AandB - - is02341-a-d3x10 - iso2341-b-d3x10 12 built, AandB - - is02341-a-d3x12 - iso2341-b-d3x12 14 built, AandB - - iso02341-a-d3x14 + iso2341-b-d3x14 16 built, AandB - - 1is02341-a-d3x16 - is02341-b-d3x16 18 built, AandB - - is02341-a-d3x18 - iso2341-b-d3x18 20 built, AandB - - is02341-a-d3x20 - iso2341-b-d3x20 22 built, AandB - - 1is02341-a-d3x22 + iso02341-b-d3x22 24 built, AandB - - is02341-a-d3x24 + iso2341-b-d3x24 26 built, AandB - - is02341-a-d3x26 + is02341-b-d3x26 28 built, AandB - - is02341-a-d3x28 - iso2341-b-d3x28 30 built, AandB - - 1is02341-a-d3x30 - iso2341-b-d3x30
One STEP file per length and type, one detail level.
Conventions
* catits max, le at its min; the rest at their nominals (ADR 0078).
e Chamfers at 30° (end) and 45° (head) from the axis, owner entries (#604 item 1). « Sharp head underside, flat top, fillet r; type B's hole along X (#604).
« No markings; material and finish are metadata only.
Sources
Source Publisher Retrieved a256
fasten-it-din-en-22341 fasten.it 2026-10-27 639865b0624b
boltport-iso2341 Boltport 2026-10-27 5f60F3925167
amesweb-iso2341 AMESweb 2026-10-27 36634a44e50b
amesweb-iso2341-figure AMESweb 2026-10-25 99b8b2cbf58b (kept outside the repo)
The whole series (verification map, drawings): CC-ISO2341-DS.
ISO 2341:1986 Page 2/2 Clevis pin - @3 - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC spec e79bc69c722a7450eb0be681b46a36c48d05506e
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.