DIN 6885 parallel key, forms A, B and AB, 2 x 2
Size drawing - 2 x 2 values on the views - | = 14 shown - enlarged 5:1
Sym. | Dimensio 2x2
1.9875 1.975-2
Width (h9)
1.9875 Height (h9)
s = 0.205 (45° every edge) GEG 1.975-2 0.16-0.25
Edge chamfer 9.205 h = 1.9875 0.16-0.25
—_ Shaft diameter range (reference) 6-8 Side view, form A
|= 14 shown lengths 6-20 . Shaft keyway depth (reference)
Hub keyway depth (reference)
Form A: two round ends Round end radius (b/2), forms A and AB
Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference. Form B: two square ends L2 = the standard itself (or its complete free preview, or the maker's drawing). L1 = two or more independent sources agree: the release gate. LO = one source only: printed amber and marked *. c = a source value was corrected; the datasheet says how. House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L16. Notes b and h at their h9 bands' midpoints, the nominal naming the band's top (ADR 0014). s at its range's midpoint, a 45° chamfer on every edge (house convention).
Form AB: one round end, one square end
Shaft: over the first value, up to and including the second. Not modeled. tl, t2: the keyway the key fits, shown for your keyway design. Not modeled.
TITLE
'? CommunityCAD Size drawing, 2 x 2
STANDARDS FOLLOWED FAMILY / DETAIL
DIN 6885-1:2021-11 Parallel key - forms A, B, AB: 2x 2 SHEET REV SCALE PROJECTION UNITS CC-DIN6885-SZ-2x2 A 5:11 € Dimensions in mm SPEC VERSION LICENSE PAGE 1fa02885ed33ccOe2d8b2F73686ba418650b8d17 CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.