'?) CommunityCAD CC-DIN6885-DS-2x2 rev A
Size datasheet - 2 x 2
DIN 6885 2 x 2 parallel key, forms A, B and AB
Size datasheet: this section's values with their levels, its lengths, conventions and sources.
a
Form A FormB Form AB 2x 2x14, form A, from above, 4:1 2x 2x14, form B, from above, 4:1 2x 2x14, form AB, from above, 4:1 Fits Shaft 6-8 mm; keyway t1 1.2,t2 1mm Lengths 8 generated, | = 6-20 Files 24 STEP AP214 (forms A, B and AB, one detail level) Sym. Dimensi Value Level b Width (h9) 1.9875 l1 +2 1.975-2 h Height (h9) 1.9875 l1 +2 1.975-2 s Edge chamfer 0.205 l1 +2 0.16-0.25 Shaft diameter range (reference) 6-8 L1-3 t1 Shaft keyway depth (reference) 1.2 L1-3 2 Hub keyway depth (reference) 1 Li - 3
Modeled value: nominal, else the midpoint of min-max. Shaft: over the first value, up to and including the second. * amber: one source (LO). Level - independent sources.
DIN 6885-1:2021-11 Page 1/2 Parallel key - 2 x 2 - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC spec 1fa02885ed33cc0e2d8b2F73686ba418650b8d17
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
---
'?) CommunityCAD
CC-DIN6885-DS-2x2 revA Size datasheet - 2 x 2
Lengths
| Status
6 built, A, Band AB
8 built, A, Band AB 10 built, A, Band AB 12 built, A, Band AB 14 built, A, Band AB 16 built, A, Band AB 18 built, A, Band AB 20 built, A, Band AB
Part key
din6885-a-2x2x6 - din6885-a-2x2x8 - din6885-a-2x2x10 - din6885-a-2x2x12 - din6885-a-2x2x14 - din6885-a-2x2x16 - din6885-a-2x2x18 - din6885-a-2x2x20 -
One STEP file per length and form, one detail level.
Conventions
din6885-b-2x2x6 + din6885-ab-2x2x6
din6885-b-2x2x8 - din6885-ab-2x2x8
din6é885-b-2x2x10 - din6é885-b-2x2x12 - din6é885-b-2x2x14 - din6é885-b-2x2x16 - din6é885-b-2x2x18 - din6é885-b-2x2x20 -
¢ band hat their h9 bands' midpoints, s at its range's midpoint (ADR 0123).
« Round ends full semicircles of b/2, tangent to both sides (#606 item 3).
« A 45° chamfer of s on every edge (#606 item 3); not specified by the standard. « No markings; material and finish are metadata only.
Sources
Source roymech-diné885 fasten-it-din6885-1 mikipulley-jis-b1301 fasten-it-uni6604
Publisher RoyMech fasten.it Miki Pulley
fasten.it
The whole series (verification map, drawings): CC-DIN6885-DS.
DIN 6885-1:2021-11
Parallel key - 2 x 2 - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC
Retrieved
2026-10-30 2026-10-30 2026-10-30 2026-10-30
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
din6885-ab-2x2x10 din6885-ab-2x2x12 din6885-ab-2x2x14 din6885-ab-2x2x16 din6885-ab-2x2x18 din6885-ab-2x2x20
sha256
d9ae34060acd 73aa22d7aSd7 72ecc3aa08cf 6a06d6c067d3
Page 2/2 spec 1fa02885ed33cc0e2d8b2F73686ba418650b8d17