28BYJ-48 geared stepper motor, 28BYJ48
Size drawing - 28BYJ48 values on the views - enlarged 2.5:1
Sym. Dimensi
Body diameter
Body height
Ear end radius
Ear width
Shaft offset
Boss diameter
Boss height
Shaft diameter
Shaft length
Flat length
Wiring box width
Lead length (not
Mounting hole spacing
Mounting hole diameter
Shaft across flats
Wiring box extent
Wiring box set-back
modeled)
'? CommunityCAD
TITLE
Source levels
Main value = the modeled value (nominal, else the middle of min-max).
Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing).
L1 = two or more independent sources agree: the release gate.
LO = one source only: printed amber and marked *.
c =a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule.
This size's values: L115 - LO 2.
Notes
No published standard: two makers' drawings, read twice each (ADR 0034, ADR 0055).
Where they differ, the largest stated (#1371 item 3). Plate thickness, box colour, leads and label illustrative: sheet DO2.
Size drawing, 28BYJ48
STANDARDS FOLLOWED No published standard: Kiatronics' and Fulling's drawings
FAMILY / DETAIL 28BYJ-48 geared stepper motor - 28BYJ48
SHEET REV
CC-BYJ48-SZ-28BYJ48 A
2.5:1
SCALE PROJECTION UNITS
Dimensions in mm
SPEC VERSION 06d85a52f6417d7ca3bac879661c871d1530757a
LICENSE CC-BY 4.0 IronPixel Labs LLC
PAGE
1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.