Cylindrical Li-ion cell, flat top, 26650
Size drawing - 26650 values on the views - enlarged 2:1
Dimension
Cell diameter, with sleeve
Overall height
Source levels
Main value = the modeled value (nominal, else the middle of min-max).
Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing).
L1 = two or more independent sources agree: the release gate.
LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule.
This size's values: L1 2.
Notes
No published standard is read: the values are the makers' datasheets, reconciled (ADR 0034, ADR 0076). D and H are maxima: the model is the envelope every listed maker's cell fits in.
TITLE
'? CommunityCAD Size drawing, 26650
STANDARDS FOLLOWED FAMILY / DETAIL
No published standard: makers' datasheets Li-ion cell - 26650
SHEET REV SCALE PROJECTION UNITS CC-LIION-SZ-26650 A 2:1 € Dimensions in mm SPEC VERSION LICENSE PAGE 9b4dF79Sbadc431acch99c84ee4535aca47a4367 CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.