'?) CommunityCAD
CC-GM-POLOLU-DS-25d-17 revA
Size datasheet - 25d-17
Pololu 25D metal gearmotor, 17 mm gearbox
Size datasheet: this size's values with their levels, conventions and sources.
25d-17, gearbox face, 0.75:1
Sym.
lg Dm
Lm
th e
Br hr ut pt tw tt le
De
Pololu's dimension diagrams (maker drawings), TT Motor and NFP Pololu 25D and 37D gearmotor - 25d-17 - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
Dimension
Gearbox diameter Gearbox length Motor can diameter Motor can length Output shaft diameter
Across the shaft's flat
Shaft length from the face
Front boss diameter
Front boss height
Number of mounting holes
Mounting hole thread
Mounting hole depth
Hole offset from the shaft (25D)
Rear boss diameter
Rear boss height
Terminal reach past the can
Across the terminals Terminal width
Terminal thickness
Encoder cover length (-enc)
Encoder cover diameter (-enc)
25d-17, side, 0.3:1 (hidden lines dashed)
For Pololu 25D gearmotor brackets and mounts
Part keys gearmotors-pololu-25d-17, gearmotors-pololu-25d-17-enc (encoder)
Files 2 STEP AP214 (simplified):
without and with the encoder
Value
25.0
24.4 30.8
CO a
on
14.7
Modeled value: nominal, else the midpoint of min-max. < / =: only that limit is given. * amber: one source (LO). c: a source value was corrected. Level - independent sources.
Page 1/2
spec 3c4229b833a653b73db51178a38d40486ee7c36b
---
* CC-GM-POLOLU-DS-25d-17 revA '?) CommunityCAD Size datasheet « 25d-17
Conventions
¢ Pololu's drawings: No published standard: the parts are Pololu's, and Pololu's dimension diagrams are their maker drawings. TT Motor and NFP cross-check the gearbox lengths and the 37D's shaft.
« Where makers differ: The largest stated shaft length, gearbox, can, bosses, terminals and encoder cover, so a mount made to the model clears every maker's motor; each maker's value is on the page. The shaft, its flat, the threads and the hole positions stay exact.
» Gearbox and face: The gearbox's front chamfer, the 25D's two seam grooves, the 37D's arc recess round the boss, the cross-head plate screws and the boss's chamfer. Illustrative, not Pololu's design, checked for fit only.
« Holes, shaft, can and encoder: Tapped holes as plain bores at the thread's nominal diameter to Pololu's stated depth; the flat's length and the shaft's end chamfer; the can's rounded rear edge, nylon end cap, terminal holes and red polarity dot; the encoder cover's walls and header slot; the CommunityCAD mark. Illustrative.
Sources Source Publisher Retrieved sha256 pololu-25d-gearmotors Pololu 2026-11-05 2bbda2bdcbaf ttmotor-gm25-370ca Shenzhen TT Motor 2026-11-07 9cdcb10a4903
The whole series (verification map, corrections, drawings): CC-GM-POLOLU-DS.
Pololu's dimension diagrams (maker drawings), TT Motor and NFP Page 2/2
Pololu 25D and 37D gearmotor - 25d-17 - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC spec 304229b833a653b73db51178a38d40486ee7c36b
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
