* CC-1S802339-DS-2.5revA '?) CommunityCAD Size datasheet - 02.5
ISO 2339 02.5 taper pin, 1:50
Size datasheet: this size's values with their levels, its lengths, conventions and sources.
Diameter @2.5 small end; 3.1 mm large end atl = 30
Lengths 13 generated, | = 10-35 Files 13 STEP AP214 (one detail level) 2.5 x 30, front view, 2:1 Sym. Dimensi Value Level d Small-end diameter (h10) 2.5 L1- 2 2.46-2.5
a End dome, axial length 0.3 ref 1-2 1:x Taper on diameter, 1:x 50 L1- 2
Modeled value: nominal, else the midpoint of min-max. ref: reference value. * amber: one source (LO). Level - independent sources.
ISO 2339:1986 Page 1/2 Taper pin - @2.5 - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC spec e79bc69c722a7450eb0be681b46a36c48d05506e
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
---
CC-1S802339-DS-2.5revA Size datasheet - 2.5
'?) CommunityCAD
Lengths | Thread Part key 10 built - - is02339-d2-5x10 12 built - - is02339-d2-5x12 14 built - - is02339-d2-5x14 16 built - - is02339-d2-5x16 18 built - - is02339-d2-5x18 20 built 3 - is02339-d2-5x20 22 built - - is02339-d2-5x22 24 built - - is02339-d2-5x24 26 built - - is02339-d2-5x26 28 built - - is02339-d2-5x28 30 built - - is02339-d2-5x30 32 built - - is02339-d2-5x32 35 built - - is02339-d2-5x35
One STEP file per length, one detail level.
Conventions
« dat its nominal (h10 lies below it); the large end is d + 1/50.
« Ends: a spherical dome of axial length a at both ends (decision #556, ADR 0077). « Types A and B: one model; the finish is metadata.
« Sharp edges, no markings; material and finish are metadata only.
Sources Source Publisher Retrieved a256 fasten-it-is02339 fasten.it 2026-10-27 ecd8a2d420d6 fasten-it-din-en-22339 fasten.it 2026-10-27 cafa0708d3f8 boltport-iso2339 Boltport 2026-10-27 2cb24220F726 minibearings-taper-pins Miniature Bearings Australia 2026-10-27 41ef3bd40d63 pts-taper-pins PTS UK (pts-uk.com) 2026-10-27 28ab6d2baee5
The whole series (verification map, drawings): CC-ISO2339-DS.
ISO 2339:1986 Page 2/2 Taper pin - @2.5 - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC spec e79bc69c722a7450eb0be681b46a36c48d05506e
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.