. CC-1S02338-DS-2.5revA '?) CommunityCAD Size datasheet - 02.5
ISO 2338 02.5 parallel pin, m6
Size datasheet: this size's values with their levels, its lengths, conventions and sources.
Diameter 2.5 m6, modeled at 2.505 mm
Lengths 10 generated, | = 6-24
Files 10 STEP AP214 (one detail level)
@2.5 x 20, front view, 3:1
Dimension
d Nominal diameter 2.5 mé Tolerance band m6 (deviation from d) 0.005 L1- 2 0.002-0.008
c End chamfer, axial length 0.4 ref a End chamfer angle to the surface, deg 15 ref
Modeled value: nominal, else the midpoint of min-max. m6: deviation from d. ref: reference value. * amber: one source (LO). Level - independent sources.
ISO 2338:1997 - ISO 286-2 (tolerance class m6) Page 1/2 Parallel pin - @2.5 - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC spec d48b25e912c3742c9e061547a7d1d28F04a1258c
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
---
'?) CommunityCAD
CC-1S02338-DS-2.5revA Size datasheet - 2.5
Lengths
| Thread
6 built -
8 built - 10 built - 12 built - 14 built - 16 built 3 18 built - 20 built - 22 built - 24 built 5
One STEP file per length, one detail level.
Conventions « Diameter: the middle of the ISO 286-2 m6 band (h8 isn't modeled).
Part key is02338-d2-5x6 is02338-d2-5x8 iso2338-d2-5x10 iso02338-d2-5x12 iso2338-d2-5x14 is02338-d2-5x16 iso02338-d2-5x18 iso2338-d2-5x20 is02338-d2-5x22 is02338-d2-5x24
« Ends: a chamfer c at » 15° to the surface at both ends, flat end faces (owner entry from ISO 2338 Figure 1).
« Sharp edges, no markings; material and finish are metadata only.
Sources
Source Publisher
iso2338-1997-sample ISO (preview published by iTeh Standards)
iso2338-1997-sample-text ISO (preview published by iTeh Standards)
fasten-it-is02338 fasten.it
opac-iso2338 OPAC
kipp-k2013 KIPP (copy hosted by Marek)
mechcodex-dowel-pins-metric MechCodex
boltport-iso2338 Boltport
engineersedge-iso286-shafts Engineers Edge
mechcodex-dowel-pins-metric-mé MechCodex
The whole series (verification map, drawings): CC-ISO2338-DS.
ISO 2338:1997 - ISO 286-2 (tolerance class m6) Parallel pin - @2.5 - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC
Retrieved
n/a
n/a
2026-10-25 2026-10-25 2026-10-25 2026-10-25 2026-10-25 2026-10-25 2026-10-25
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
sha256
841b4692d664 (kept outside the repo)
841b4692d664 (kept outside the repo)
dbb0979696ad Sd3dee2cf8e4 335b94d398a7 2cefO04b5d7F 12146dbe9fc8 9799d88b4078 2cefO04b5d7F
Page 2/2 spec d48b25e912c3742c9e061547a7d1d28F04a1258c