2.5 mm Dowel Pin, ISO 2338 datasheet (PDF)

Datasheet — 2.5 mm Dowel Pin, ISO 2338 by Milo

Open the PDF
2.5 mm Dowel Pin, ISO 2338Get the CAD model2.5 mm Dowel Pin, ISO 2338CC-ISO2338-DS-2.5.pdf

Text of this datasheet

* CC-1S802338-DS-2.5 revA '?) CommunityCAD Size datasheet - 02.5

ISO 2338 @2.5 parallel pin, m6

Size datasheet: this size's values with their levels, its lengths, conventions and sources.

Diameter 2.5 m6, modeled at 2.505 mm

Lengths 10 generated, | = 6-24

Files 10 STEP AP214 (one detail level)

@2.5 x 20, front view, 3:1

Dimension

d Nominal diameter 2.5 mé Tolerance band m6 (deviation from d) 0.005 L1- 2 0.002-0.008

c End chamfer, axial length 0.4 ref a End chamfer angle to the surface, deg 15 ref

Modeled value: nominal, else the midpoint of min-max. m6: deviation from d. ref: reference value. * amber: one source (LO). Level - independent sources.

ISO 2338:1997 - ISO 286-2 (tolerance class m6) Page 1/2 Parallel pin - 2.5 - Dimensions in mm - CC-BY 4.0, IronPixel Labs LLC spec cfd05b053c736a4f15ba3030aa41f ebd40cdc205

Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.

---

CC-1S802338-DS-2.5 revA Size datasheet - 02.5

'?) CommunityCAD

Lengths

6 built - - is02338-d2-5x6

8 built - - is02338-d2-5x8 10 built - - is02338-d2-5x10 12 built - - is02338-d2-5x12 14 built - - is02338-d2-5x14 16 built = - is02338-d2-5x16 18 built - - is02338-d2-5x18 20 built - - is02338-d2-5x20 22 built - - is02338-d2-5x22 24 built - - is02338-d2-5x24

One STEP file per length, one detail level.

Conventions

« Diameter: the middle of the ISO 286-2 m6 band (h8 isn't modeled). « Ends: a chamfer c at = 15° to the surface at both ends, flat end faces (owner entry from ISO 2338 Figure 1). « Sharp edges, no markings; material and finish are metadata only.

Sources

Source Publisher Retrieved sha256

iso2338-1997-sample ISO (preview published by iTeh n/a 841b4692d664 (kept outside the repo) Standards)

iso2338-1997-sample-text ISO (preview published by iTeh n/a 841b4692d664 (kept outside the repo) Standards)

fasten-it-is02338 fasten.it 2026-10-25 dbb0979696ad

opac-iso2338 OPAC 2026-10-25 5Sd3dee2cf8e4

kipp-k2013 KIPP (copy hosted by Marek) 2026-10-25 335b94d398a7

mechcodex-dowel-pins-metric MechCodex 2026-10-25 2cefO04b5d7F

boltport-iso2338 Boltport 2026-10-25 12146dbe9fc8

engineersedge-iso286-shafts Engineers Edge 2026-10-25 9799d88b4078

mechcodex-dowel-pins-metric-mé MechCodex 2026-10-25 2cefO04b5d7F

The whole series (verification map, drawings): CC-ISO2338-DS.

ISO 2338:1997 - ISO 286-2 (tolerance class m6) Page 2/2 Parallel pin - 2.5 - Dimensions in mm - CC-BY 4.0, IronPixel Labs LLC spec cfd05b053c736a4f15ba3030aa41f ebd40cdc205

Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.