M.2 card envelope, 2280
Size drawing - 2280 values on the views - key B+M drawn; key M has no B slot (kb) - scale 1:1
Sym. Dimensio!
Card width
80 79.85-80.15
ko = 4.00* cl = 0.30, ca = 20.0 PCB thickness 8.80
rT] Edge tab width 19.85
Shoulder radius 0.50*
Card length (the size's own)
Key slot width 20% Key slot depth from the edge 50% M slot off the centreline +125 B slot off the centreline (key B+M) +625
ks = 1.20*, rs = 0.50* dn = 3.50, dpt = 5.50 kd = 3.50* Gold finger pitch 50% Gold finger width
Fingers' leading edge from the edge (max)
' Top finger length from the edge W = 22.00 bw = 19.85
21.85-22.15 Bottom finger length from the edge
cl Lead-in chamfer length ca Lead-in chamfer angle
ko Top component keep-out from the edge (min)
79.85-80.15 pp = 0.50*, pw = 0.35%, pit = 2.00* ht Top component height, S3 (max)
dn Mounting notch @
dpt Top ground pad
dpb Bottom ground pad ©
Source levels
Main value = the modeled value (nominal, else the middle of min-max).
Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing).
L1 = two or more independent sources agree: the release gate.
LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L114 - LO 9.
Notes
Values are the makers' drawings and text, reconciled (ADR 0140); no free standard. The card edge, notch, slots and heights are one drawing at every length; L is each length's own. ht2, hb, hb2 and the makers' Tp are recorded, not modeled (S3 only).
TITLE
'? CommunityCAD Size drawing, 2280
STANDARDS FOLLOWED FAMILY / DETAIL
Makers' M.2 drawings (no free standard) M.2 card - 2280
SHEET REV SCALE PROJECTION UNITS CC-M2CARD-SZ-2280 A 1:1 € Dimensions in mm SPEC VERSION LICENSE PAGE 304229b833a653b73db51178a38d40486ee7c36b CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
