20 B-type slot 6 aluminium extrusion, per Misumi HFS5, 20x80
Size drawing - 20x80 values on the views - enlarged 2:1
Detailed level - 20x80 - 2:1 interior illustrative (ADR 0082)
r = 1* (4 corners)
w = 1.5* (diagonal web)
@ d = 4.2* (each core)
Sym.
Dimension (mi
Profile width
Profile height
Slot pitch (cell side)
Slot opening
Slot undercut width
Lip thickness
Cavity depth behind the lip
Slot depth
Core width
Core bore diameter
Outside corner radius
Diagonal web thickness
Sectional area, mm? (catalog)
Modeled area, mm? (detailed)
1.5*
605*
615 (+1.7 %)
'? CommunityCAD
TITLE
Size drawing, 20x80
Source levels
Main value = the modeled value (nominal, else the middle of min-max).
Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing).
L1 = two or more independent sources agree: the release gate.
LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: LO 11.
Notes
L1 here = Misumi and Motedis agree; value = the maker's drawn nominal.
20x80: single source, one maker makes it (ADR 0083, #958 item 2 B).
s grey = not drawn for this profile: the series' one stated value (ADR 0082).
Modeled area: the detailed section, checked against A within 12 % (ADR 0082). ILLUSTRATIVE INTERIOR - house rule from Misumi HFS5's drawn values (ADR 0082)
STANDARDS FOLLOWED No published standard (ADR 0034) - per Misumi HFS5 - Motedis (outline, slot)
FAMILY / DETAIL Aluminium extrusion - 20x80
SHEET
CC-EXTR20-B6-SZ-20x80
REV SCALE
A 21
PROJECTION
UNITS
Dimensions in mm
SPEC VERSION 54d2547caedeObédef71904216be1e6990995d2a
LICENSE
CC-BY 4.0 IronPixel Labs LLC
PAGE
1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.