20 V-slot aluminium extrusion, per OpenBuilds V-Slot, 20x60
Size drawing - 20x60 values on the views - enlarged 2:1
Sym. | Dimension (mi Profile width Profile height Face to first slot centre (cell 2q) Slot opening (lip tips) va = 90°* (V angle) V mouth width at the face r = 0.5* (4 corners) Vangle, degrees Slot undercut width @ d = 4.2 (each core) Lip thickness Cavity depth behind the lip Slot depth (t + u) Core bore diameter Diagonal web thickness Outside corner radius C-Beam arm width
C-Beam channel floor
Modeled area, mm? (detailed)
Source levels
Main value = the modeled value (nominal, else the middle of min-max).
Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing). L1 = two or more independent sources agree: the release gate.
Detailed level - 20x60 - 2:1 LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L13 - LO 10.
Notes
L1 here = OpenBuilds and Ooznest agree; value = OpenBuilds' drawn nominal. * = OpenBuilds alone, or Ooznest's e (#983 items 1, 2).
Not on this profile: ca, cf.
A: the detailed section's area, reported; no maker publishes one (ADR 0086).
w = 1.50* (diagonal web)
OpenBuilds' section, CC BY-SA 4.0
TITLE
'? CommunityCAD Size drawing, 20x60
STANDARDS FOLLOWED FAMILY / DETAIL
No published standard (ADR 0034) - OpenBuilds V-Slot - Ooznest (outline) Aluminium extrusion - 20x60 SHEET REV SCALE PROJECTION UNITS CC-EXTR20-VSLOT-SZ-20x60 A 2:1 € Dimensions in mm
SPEC VERSION LICENSE PAGE e05c8289049003c09e32d8bd4ae913179e09a28c CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.