* CC-MAGBLOCK-DS-20x20x10 rev A '?) CommunityCAD Size datasheet - 20x20x10
20 x 20 x 10 mm neodymium block magnet
Size datasheet: this size's values with their levels, conventions and sources.
For Nickel-plated, magnetised through the height, any grade Part key magnets - block- 20x20x10 Files 1 STEP AP214 (simplified) 20x20x10, pole face, 1:1 20x20x10, side, 2:1 (hidden lines dashed) Sym. Dimensi Value Level L Length, the longer side 20 L1- 2 Ww Width, the other side 20 L1- 2 H Height, magnetised axis 10 L1- 2
Modeled value: nominal, else the midpoint of min-max. s / =: only that limit is given. * amber: one source (LO). c: a source value was corrected. Level - independent sources.
No published standard (makers' stock lists) Page 1/2 Neodymium block magnet - 20x20x10 - Dimensions in mm - CC-BY 4.0, IronPixel Labs LLC spec d7051ebac2ed98fe8d173be9178a54b140eca668
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
---
CC-MAGBLOCK-DS-20x20x10 rev A Size datasheet - 20x20x10
'?) CommunityCAD
Conventions
« Edges and corners: Every edge rounded at r = the smallest of the part's dimensions / 10. Illustrative, not stated by the makers, checked for fit only: the faces stay at the sizes the makers state.
« Markings: No pole, grade or maker marking and no CommunityCAD mark. Neither pole face is marked or modeled as north: polarity isn't geometry.
« Values: No published standard: the designation both makers sell the magnet under, from their stock lists, which agree. Nominal sizes of the finished, plated part; both makers state +/- 0.1 mm, which isn't modeled.
« Finish and grade: Bright nickel (Ni-Cu-Ni): render and metadata only. Magnetised axially, through H. The grade is each maker's, as its listing states it; the shape is the same in any grade.
* supermagnete lists this size in N42. « first4magnets lists this size in N42.
Sources Source Publisher Retrieved sha256 supermagnete-magnets-block Webcraft GmbH (supermagnete) 2026-10-30 599b3F6cf8c1 first4magnets-block First4magnets (Magnet Expert Ltd) 2026-10-30 494b91d81471
The whole series (verification map, corrections, drawings): CC- MAGBLOCK-DS.
No published standard (makers' stock lists) Page 2/2 Neodymium block magnet - 20x20x10 - Dimensions in mm - CC-BY 4.0, IronPixel Labs LLC spec d7051ebac2ed98fe8d173be9178a54b140eca668
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.