Neodymium block magnet, length x width x height, 20x10x2
Size drawing - 20x10x2 values on the views - enlarged 8:1
Dimension 20x10x2
Length, the longer side
Width, the other side
Height, magnetised axis
Source levels
Main value = the modeled value (nominal, else the middle of min-max).
Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing). L1 = two or more independent sources agree: the release gate.
LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule.
This size's values: L1 3.
Notes
No published standard: values from the makers' stock lists (ADR 0034). Every edge rounded r = the smallest dimension / 10, illustrative: sheet DO2.
TITLE
'? CommunityCAD Size drawing, 20x10x2
STANDARDS FOLLOWED No published standard (makers' stock lists)
FAMILY / DETAIL
Neodymium block magnet - 20x10x2
SHEET
CC-MAGBLOCK-SZ-20x10x2 A 8:1
REV SCALE PROJECTION
UNITS
Dimensions in mm
SPEC VERSION
LICENSE
d7051ebac2ed98fe8d173be9178a54b140ecab68 CC-BY 4.0 IronPixel Labs LLC
PAGE
1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.