20 V-slot t-5 Extrusion Joining Plate size drawing (PDF)

Datasheet — 20 V-slot t-5 Extrusion Joining Plate by Milo

Open the PDF
20 V-slot t-5 Extrusion Joining PlateGet the CAD model20 V-slot t-5 Extrusion Joining PlateCC-JOINPLATE-SZ-vs-t-5.pdf

Text of this datasheet

Extrusion joining plate, inline, Land T, vs-t-5

Size drawing - vs-t-5 values on the views - enlarged 2:1

Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey under a value = its min-max, where the source gives both. < / = = the source gives only that limit, modeled at it. ref = reference. L2 = the standard itself (or its complete free preview, or the maker's drawing). L1 = two or more independent sources agree: the release gate. Hole diameter LO = one source only: printed amber and marked *. c =a source value was corrected; the datasheet says how. House convention = a detail no source dimensions,

holes: n = 5*, d = 5.10* Leg width

Thickness

Number of holes

drawn to a stated house rule. Hole spacing This size's values: LO 15. Notes No published standard: each plate is its reference maker's design (ADR 0034). Blank: that plate's drawing doesn't use the symbol. Hole to outer edge Mark: sheet DO2.

Hole to end

T plate height

Stem left edge ordinate

Stem right edge ordinate

Second hole ordinate

Third hole ordinate

Upper hole ordinate

Top hole ordinate

TITLE

'? CommunityCAD Size drawing, vs-t-5

STANDARDS FOLLOWED FAMILY / DETAIL No published standard (makers' drawings) Extrusion joining plate - vs-t-5

SHEET REV SCALE PROJECTION UNITS

CC-JOINPLATE-SZ-vs-t-5 A 24 & Dimensions in mm SPEC VERSION LICENSE PAGE 304229b833a653b73db51178a38d40486ee7c356b CC-BY 4.0 IronPixel Labs LLC 1/1

Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.