20 B-type slot 6 Slot Cover datasheet (PDF)

Datasheet — 20 B-type slot 6 Slot Cover by Milo

Open the PDF
20 B-type slot 6 Slot CoverGet the CAD model20 B-type slot 6 Slot CoverCC-SLOTCOVER-DS-20-b6.pdf

Text of this datasheet

* CC-SLOTCOVER-DS-20-bé6 revA '?) CommunityCAD Size datasheet - 20-b6

20 B-type slot 6 extrusion slot cover

Size datasheet: this size's values with their levels, conventions and sources.

For 20 B-type slot 6 aluminium extrusion slots

Part keys extrusion-slot-covers- 20-b6x100 ... (one per stock length)

Files 14 STEP AP214 (simplified), one per 20-b6, end view, 3:1 stock length Sym. Dimensi Value Level b Face width 7.2k LO: 1 b1 Widest point, across the feet 6x lo: 1 h Depth 5.9% lo-1 t Face thickness 0.7* LO: 1

Modeled value: nominal, else the midpoint of min-max. < / =: only that limit is given. * amber: one source (LO). c: a source value was corrected. Level - independent sources.

No published standard (makers' drawings) Page 1/2 Extrusion slot cover - 20-b6 - Dimensions in mm - CC-BY 4.0, IronPixel Labs LLC spec 304229b833a653b73db51178a38d40486ee7c36b

Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.

---

CC-SLOTCOVER-DS-20-bé6 revA Size datasheet - 20-b6

'?) CommunityCAD

Lengths | Status Part key 100 built - - extrusion-slot-covers-20-b6x100 150 built - - extrusion-slot-covers-20-b6x150 200 built - - extrusion-slot-covers-20-b6x200 250 built - - extrusion-slot-covers-20-b6x250 300 built - - extrusion-slot-covers-20-b6x300 350 built = - extrusion-slot-covers-20-b6x350 400 built - - extrusion-slot-covers-20-b6x400 450 built - - extrusion-slot-covers-20-b6x450 500 built - - extrusion-slot-covers-20-b6x500 600 built - - extrusion-slot-covers-20-b6x600 750 built - - extrusion-slot-covers-20-b6x750 1000 built - - extrusion-slot-covers-20-b6x1000 1500 built - - extrusion-slot-covers-20-b6x1500 2000 built - - extrusion-slot-covers-20-b6x2000

One STEP file per stock length.

Conventions

« Legs and feet: Two legs one wall t thick under the face, which overhangs each leg by one wall; at the bottom of each leg a foot steps out at 45° to the widest point b1 (the catch under the slot lips), then straight down to the depth h; its inside at b2 / 2 where a drawing gives the open-side gap b2, else in line with the leg. The legs' shape (wall thickness where no drawing gives it, feet, bumps, corner rounds) is illustrative, after each size's reference drawing, not any maker's design; face width, widest point and depth from the makers' drawings (ADR 0101, #1042 item 4).

« Wall thickness: t where the reference drawing gives it; where it doesn't (40 I-type slot 8: item and KIPP draw none), t = b/ 10.

- Bumps and rounds: Round bumps of radius t/2 on each leg's outside, as many as the reference drawing shows, equally spaced; R t/2 on the face's outer corners and the feet's outer bottom corners; every other edge sharp.

« Values: No published standard: b, b1 and h from two or more makers' drawings, the largest any maker states where they differ, so the model covers every maker's cover; t and b2 the reference maker's. 20 B-type slot 6 is Misumi HSCAS5 alone.

« Ends, lengths, finish: Flat square-cut ends; the stock lengths as file options (length tolerance not modeled); no markings; matte black plastic, render and metadata only. Face out is the cover use; reversed, the same strip holds a panel.

Sources Source Publisher Retrieved sha256 misumi-slot-covers MISUMI 2026-10-29 7a929bce3181 (kept outside the repo)

The whole series (verification map, corrections, drawings): CC-SLOTCOVER-DS.

No published standard (makers' drawings) Page 2/2 Extrusion slot cover - 20-b6 - Dimensions in mm - CC-BY 4.0, IronPixel Labs LLC spec 304229b833a653b73db51178a38d40486ee7c36b

Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.