Extrusion corner bracket, per profile system, b6-single
Size drawing - b6-single values on the views - enlarged 4:1
ex2 = 18*
Sym. | Dimensi b6-single
* L Leg length a
x Upright leg length ay
20*
* Wall thickness Gott
k Hole diameter 5.3
3x Number of holes
1* Key height
Hole row on the first leg
Second hole row on the first leg
Hole row on the upright leg
ey Hole column from the side
Source levels
Main value = the modeled value (nominal, else the middle of min-max).
Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing).
L1 = two or more independent sources agree: the release gate.
LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: LO 11.
Notes
No published standard: each value the reference maker's drawing, single source (ADR 0034). Side walls, keys' width and length, fillet and mark are illustrative: sheet DO2.
TITLE
'? CommunityCAD Size drawing, b6-single
STANDARDS FOLLOWED FAMILY / DETAIL No published standard (makers' drawings) Extrusion corner bracket - b6-single
SHEET REV SCALE PROJECTION UNITS: CC-CORNBRKT-SZ-bé-single |A an € Dimensions in mm
SPEC VERSION LICENSE PAGE c7a962633bdbeSé6cbabcf253a98F14b1bbf3bd0F CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.