20 B-type slot 6 M4 Hammer-head T-slot Nut size drawing (PDF)

Datasheet — 20 B-type slot 6 M4 Hammer-head T-slot Nut by Milo

Open the PDF
20 B-type slot 6 M4 Hammer-head T-slot NutGet the CAD model20 B-type slot 6 M4 Hammer-head T-slot NutCC-TNUTH-SZ-b6-M4.pdf

Text of this datasheet

Hammer-head T-slot nut, per slot system and thread, b6-M4

Size drawing - b6-M4 values on the views - enlarged 8:1

Sym. Dimensi

Body width across the slot Body length along the slot

Neck width

Overall height . Body height . - - Neck height . Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey under a value = its min-max, where the source gives both. < / = = the source gives only that limit, modeled at it. ref = reference.

L2 = the standard itself (or its complete free preview, or the maker's drawing).

L1 = two or more independent sources agree: the release gate.

LO = one source only: printed amber and marked *.

c = a source value was corrected; the datasheet says how.

House convention = a detail no source dimensions, drawn to a stated house rule.

This size's values: L15 - LO 1.

Notes

No published standard: values from the makers' drawings (ADR 0034). House details are illustrative: sheet DO2.

TITLE

'? CommunityCAD Size drawing, b6-M4

STANDARDS FOLLOWED FAMILY / DETAIL

No published standard (makers' drawings) Hammer-head T-slot nut - b6-M4 SHEET REV SCALE PROJECTION UNITS CC-TNUTH-SZ-b6-M4 A 8:1 € Dimensions in mm SPEC VERSION LICENSE PAGE 304229b833a653b73db51178a38d40486ee7c36b CC-BY 4.0 IronPixel Labs LLC 1/1

Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.