'?) CommunityCAD
CC-1S08752-DS-2 revA Size datasheet - @2
ISO 8752 @2 slotted spring pin, heavy duty
Size datasheet: this size's values with their levels, its lengths, conventions and sources.
or Diameter
Lengths
Files
@2 x 20, front view, 3:1
Sym. Dimension
d Nominal diameter (the hole's, H12) di Outside diameter, before mounting d2 Inside diameter, before mounting (ref) s Wall thickness
a End chamfer, axial length
w Slot width mt (d1 max - d), clause 4
F Double shear strength, min, kN
@2 (the hole); free outside d1 = 2.35 mm, bore 1.55 mm
15 generated, | = 4-30
15 STEP AP214 (one detail level)
Value Level
2 L1 + 2
2.35 L1 4 2.3-2.4
1.5 ref 1-4
0.4 1-4
0.45 ll - 2 0.35-0.55
1.257% Lo - 4
2 2.82 1-3
Modeled value: nominal, else the midpoint of min-max, before mounting. ref: reference value. * amber: one source (LO). Level - independent
sources.
ISO 8752:2009 Spring pin - @2 - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
Page 1/2 spec e79bc69c722a7450eb0be681b46a36c48d05506e
---
CC-1S08752-DS-2 revA Size datasheet - @2
'?) CommunityCAD
Lengths
| Thread Part key
4 built - - is08752-d2x4
5 built - - is08752-d2x5
6 built - - iso8752-d2x6
8 built - - is08752-d2x8 10 built - - iso08752-d2x10 12 built 3 - iso8752-d2x12 14 built - - iso8752-d2x14 16 built - - iso8752-d2x16 18 built - - iso8752-d2x18 20 built - - iso8752-d2x20 22 built - - is08752-d2x22 24 built - - is08752-d2x24 26 built - - is08752-d2x26 28 built - - is08752-d2x28 30 built - - is08752-d2x30
One STEP file per length, one detail level.
Conventions
« Modeled free, before mounting: d1 at the middle of its band, bore d1 - 2 s.
¢ Slot: full length, radial faces, w = mt (d1 max - d) (not specified by the standard; from the clause 4 closing requirement). « Ends: a chamfer a long to d3 = d1 - s at both ends (house rule, ADR 0061).
« Sharp edges, no markings; material and finish are metadata only.
Sources
Source Publisher Retrieved sha256
iso8752-2009-sample ISO (preview published by iTeh Standards) n/a 7594fabe5014 (kept outside the repo) fasten-it-iso8752 fasten.it 2026-10-26 c901b114ee7a
fuller-iso8752 Fuller Fasteners 2026-10-26 e3c86e160c54
fasteners-eu-iso8752 fasteners.eu 2026-10-26 fbe1001a16a0
spirol-iso8752 SPIROL 2026-10-26 d71481d70a68
pule-iso8752-slot CommunityCAD 2026-10-27 1ddaéd6d18dc
The whole series (verification map, drawings): CC-ISO8752-DS.
ISO 8752:2009 Page 2/2 Spring pin - @2 - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC spec e79bc69c722a7450eb0be681b46a36c48d05506e
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.