* CC-1S02338-DS-2 revA '?) CommunityCAD Size datasheet - @2
ISO 2338 @2 parallel pin, m6
Size datasheet: this size's values with their levels, its lengths, conventions and sources.
Diameter @2 m6, modeled at 2.005 mm
Lengths 8 generated, | = 6-20
Files 8 STEP AP214 (one detail level)
@2 x 20, front view, 3:1
Dimension
d Nominal diameter 2 mé Tolerance band m6 (deviation from d) 0.005 L1- 2 0.002-0.008
c End chamfer, axial length 0.35 ref a End chamfer angle to the surface, deg 15 ref
Modeled value: nominal, else the midpoint of min-max. m6: deviation from d. ref: reference value. * amber: one source (LO). Level - independent sources.
ISO 2338:1997 - ISO 286-2 (tolerance class m6) Page 1/2 Parallel pin - @2 - Dimensions in mm - CC-BY 4.0, IronPixel Labs LLC spec d48b25e912c3742c9e061547a7d1d28F04a1258c
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
---
CC-1S02338-DS-2 revA Size datasheet - @2
'?) CommunityCAD
Lengths
| Thread Part key
6 built - - is02338-d2x6
8 built - - is02338-d2x8 10 built - - is02338-d2x10 12 built - - is02338-d2x12 14 built - - is02338-d2x14 16 built 3 - is02338-d2x16 18 built - - is02338-d2x18 20 built - - is02338-d2x20
One STEP file per length, one detail level. Listed by one source only, not generated: | = 5.
Conventions
« Diameter: the middle of the ISO 286-2 m6 band (h8 isn't modeled). « Ends: a chamfer c at * 15° to the surface at both ends, flat end faces (owner entry from ISO 2338 Figure 1). « Sharp edges, no markings; material and finish are metadata only.
Sources
Source Publisher Retrieved sha256
iso2338-1997-sample ISO (preview published by iTeh n/a 841b4692d664 (kept outside the repo) Standards)
iso2338-1997-sample-text ISO (preview published by iTeh n/a 841b4692d664 (kept outside the repo) Standards)
fasten-it-is02338 fasten.it 2026-10-25 dbb0979696ad
opac-iso2338 OPAC 2026-10-25 5Sd3dee2cf8e4
kipp-k2013 KIPP (copy hosted by Marek) 2026-10-25 335b94d398a7
mechcodex-dowel-pins-metric MechCodex 2026-10-25 2cefO04b5d7F
boltport-iso2338 Boltport 2026-10-25 12146dbe9fc8
engineersedge-iso286-shafts Engineers Edge 2026-10-25 9799d88b4078
mechcodex-dowel-pins-metric-mé MechCodex 2026-10-25 2cefO04b5d7F
The whole series (verification map, drawings): CC-ISO2338-DS.
ISO 2338:1997 - ISO 286-2 (tolerance class m6) Page 2/2 Parallel pin - @2 - Dimensions in mm - CC-BY 4.0, IronPixel Labs LLC spec d48b25e912c3742c9e061547a7d1d28F04a1258c
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.