19x26 Shim Washer (Shim Ring), DIN 988

Made for 19x26 screws, this shim washer (DIN 988) has a 19 mm hole and is 26 mm across. Download it as 5 lengths from 0.1 to 1 mm, each as simplified STEP.

How these parts are made, and what the levels mean: read the method

• Also searched as: 19x26 shim ring, 19x26 x 0.1 to 19x26 x 1 shim rings
• Model id: din988-19x26
• Standard: DIN 988:1990-03 · size 19x26

Lengths

Length (mm)	Part key	Simplified
0.1	din988-19x26x0-1	STEP
0.2	din988-19x26x0-2	STEP
0.3	din988-19x26x0-3	STEP
0.5	din988-19x26x0-5	STEP
1	din988-19x26x1	STEP

Dimensions

Symbol	Name	min	nom	max	Modeled	Rule	Level
d1	Inside diameter		19		19	nominal	L1
d2	Outside diameter		26		26	nominal	L1

Drawing

As a PDF: CC-DIN988-SZ-19x26.pdf.

The 19x26 shim washer beside the 18x25 and the 20x28

The 19x26 is number 17 of the 18 DIN 988 shim washers published here, listed from 3x6 to 20x28.

• Inside diameter (d1): 19 mm on the 19x26 shim washer, against 18 mm on the 18x25 and 20 mm on the 20x28.
• Outside diameter (d2): 26 mm on the 19x26 shim washer, against 25 mm on the 18x25 and 28 mm on the 20x28.

Other sizes

• One size smaller: 18x25 Shim Washer (Shim Ring), DIN 988, 18 mm hole, 25 mm OD.
• One size larger: 20x28 Shim Washer (Shim Ring), DIN 988, 20 mm hole, 28 mm OD.

Documents

• CC-DIN988-DS-19x26.pdf: 19x26 datasheet: values with levels, lengths, sources
• CC-DIN988-SZ-19x26.pdf: 19x26 drawing: this size's values on the views
• parts.json: the part record of every length (the platform contract)

Sources

fasten-it-din988, fasteners-eu-din988. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.