Battery holder, MPD BK-18650-PC2
Size drawing - MPD BK-18650-PC2 values on the views - scale 1:1
Dimensio: MPD BK-1865: Overall length 76.96 Overall width 20.98 Overall height 21.41
Terminal pitch 72.90
Terminal pin length
Terminal pin width
Terminal pin thickness
Source levels
Main value = the modeled value (nominal, else the middle of min-max).
Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing). L1 = two or more independent sources agree: the release gate.
LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L2 7.
Notes
No published standard: each value is the maker's own drawing of that part (ADR 0089). - = not dimensioned by that part's drawing: a house rule (sheet DO2) or not present. Contacts, walls, bays and windows are illustrative: sheet DO2. h= 21.41 ¥ 11 = 3.30 w1 = 1.52, t = 0.38
TITLE
'? CommunityCAD Size drawing, MPD BK-18650-PC2
STANDARDS FOLLOWED FAMILY / DETAIL No published standard (each maker's drawing) Battery holder - MPD BK-18650-PC2 SHEET REV SCALE PROJECTION UNITS
CC-BATTHOLDER-SZ-mpd-bk-18650-pc2 | A 1:1 Dimensions in mm
SPEC VERSION LICENSE PAGE ec102202cfd5583116e22079eF262796b321054a CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.