17 mm External Retaining Ring (Shaft Circlip), DIN 471

The 17 mm external retaining ring (DIN 471) fits a 17 mm shaft with a groove diameter of 16.2 mm, and is 1 mm thick. Here as simplified STEP files.

How these parts are made, and what the levels mean: read the method

• Also searched as: 17 mm circlip
• Model id: din471-d17
• Standard: DIN 471:2011 · size 17 mm

Files

Part key	Simplified
din471-d17	STEP

Dimensions

Symbol	Name	min	nom	max	Modeled	Rule	Level
s	Ring thickness		1		1	nominal	L1
s_lim	Ring thickness, limits	0.94		1	0.97	midpoint of min–max	L0 (max: one source)
d3	Free diameter		15.7		15.7	nominal	L1
d3_lim	Free diameter, limits	15.34		15.8	15.57	midpoint of min–max	L1
a	Lug height			3.8	3.8	single limit (max), modeled at the limit	L1
b	Radial width		2.3 ref		2.3	reference value	L1
d5	Plier hole diameter	1.7			1.7	single limit (min), modeled at the limit	L1
d2	Groove diameter		16.2		16.2	nominal	L1
m	Groove width		1.1		1.1	nominal	L1
n	Groove edge margin	1.2			1.2	single limit (min), modeled at the limit	L1

Drawing

As a PDF: CC-DIN471-SZ-17.pdf.

The 17 mm external retaining ring beside the 16 mm and the 18 mm

The 17 mm is number 15, counting from the smallest, of the 18 DIN 471 external retaining rings published here, from 3 mm to 20 mm.

• Ring thickness (s): 1 mm on the 17 mm external retaining ring, against 1 mm on the 16 mm and 1.2 mm on the 18 mm.
• Ring thickness, limits (s_lim): 0.94 to 1 mm on the 17 mm external retaining ring, against 0.94 to 1 mm on the 16 mm and 1.14 to 1.2 mm on the 18 mm.
• Free diameter (d3): 15.7 mm on the 17 mm external retaining ring, against 14.7 mm on the 16 mm and 16.5 mm on the 18 mm.
• Free diameter, limits (d3_lim): 15.34 to 15.8 mm on the 17 mm external retaining ring, against 14.34 to 14.8 mm on the 16 mm and 16.14 to 16.6 mm on the 18 mm.
• Lug height (a): up to 3.8 mm on the 17 mm external retaining ring, against up to 3.7 mm on the 16 mm and up to 3.9 mm on the 18 mm.
• Radial width (b): 2.3 mm (reference) on the 17 mm external retaining ring, against 2.2 mm (reference) on the 16 mm and 2.4 mm (reference) on the 18 mm.
• Plier hole diameter (d5): at least 1.7 mm on the 17 mm external retaining ring, against at least 1.7 mm on the 16 mm and at least 2 mm on the 18 mm.
• Groove diameter (d2): 16.2 mm on the 17 mm external retaining ring, against 15.2 mm on the 16 mm and 17 mm on the 18 mm.

Other sizes

• One size smaller: 16 mm External Retaining Ring (Shaft Circlip), DIN 471, 16 mm shaft, 15.2 mm groove, 1 mm thick.
• One size larger: 18 mm External Retaining Ring (Shaft Circlip), DIN 471, 18 mm shaft, 17 mm groove, 1.2 mm thick.

Documents

• CC-DIN471-DS-17.pdf: 17 datasheet: values with levels, sources
• CC-DIN471-SZ-17.pdf: 17 drawing: this size's values on the views
• parts.json: the part record of this size (the platform contract)

Sources

fasten-it-din471, fasteners-eu-din471, hc-maschinentechnik-din471, seeger-din471. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.