GT2 timing pulley, 2 mm pitch, 6 mm belt, teeth and bore, 16t-5
Size drawing - 16t-5 values on the views - enlarged 6:1
16t-5
Pitch diameter (the belt's pitch line) ee
Outside diameter (the band) 9.68
Flange diameter 14.732
Face width between the flanges ToL
25k Width over the flanges 10.5
Overall length 14.2748x
* Hub diameter 14.732
3x Set screw thread
Gates' hub length (recorded)
de Misumi's face diameter (recorded)
Odf = 14.732 Source levels Main value = the modeled value (nominal, else the middle of min-max).
Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing). @dh = 14.732* L1 = two or more independent sources agree: the release gate. LO = one source only: printed amber and marked *. c = a source value was corrected; the datasheet says how. House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L1 4 - LO 6. Notes Gates, Misumi and SDP/SI tables, each its own lineage (ADR 0034). Largest stated where makers differ (ADR 0138 row 4); every maker's value on the page. Band a plain cylinder at da (no teeth); chamfers illustrative: sheet DO2.
L = 14.2748*
= 10.3*
TITLE
'? CommunityCAD Size drawing, 16t-5
STANDARDS FOLLOWED FAMILY / DETAIL
Gates' design manual, Misumi GPA 2GT and SDP/SI tables GT2 timing pulley - 16t-5
SHEET REV SCALE PROJECTION UNITS
Oda = 9.68 CC-GT2-SZ-16t-5 A 6:1 € Dimensions in mm
SPEC VERSION LICENSE PAGE 7c593bb2a1674Fad1ed142d21F252056a66a74e CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.