16t-5 Timing Pulley, GT2 size drawing (PDF)

Datasheet — 16t-5 Timing Pulley, GT2 by Milo

Open the PDF
16t-5 Timing Pulley, GT2Get the CAD model16t-5 Timing Pulley, GT2CC-GT2-SZ-16t-5.pdf

Text of this datasheet

GT2 timing pulley, 2 mm pitch, 6 mm belt, teeth and bore, 16t-5

Size drawing - 16t-5 values on the views - enlarged 6:1

16t-5

Pitch diameter (the belt's pitch line) ee

Outside diameter (the band) 9.68

Flange diameter 14.732

Face width between the flanges ToL

25k Width over the flanges 10.5

Overall length 14.2748x

* Hub diameter 14.732

3x Set screw thread

Gates' hub length (recorded)

de Misumi's face diameter (recorded)

Odf = 14.732 Source levels Main value = the modeled value (nominal, else the middle of min-max).

Grey under a value = its min-max, where the source gives both.

< / = = the source gives only that limit, modeled at it. ref = reference.

L2 = the standard itself (or its complete free preview, or the maker's drawing). @dh = 14.732* L1 = two or more independent sources agree: the release gate. LO = one source only: printed amber and marked *. c = a source value was corrected; the datasheet says how. House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L1 4 - LO 6. Notes Gates, Misumi and SDP/SI tables, each its own lineage (ADR 0034). Largest stated where makers differ (ADR 0138 row 4); every maker's value on the page. Band a plain cylinder at da (no teeth); chamfers illustrative: sheet DO2.

L = 14.2748*

bf = 10.3*

TITLE

'? CommunityCAD Size drawing, 16t-5

STANDARDS FOLLOWED FAMILY / DETAIL

Gates' design manual, Misumi GPA 2GT and SDP/SI tables GT2 timing pulley - 16t-5

SHEET REV SCALE PROJECTION UNITS

Oda = 9.68 CC-GT2-SZ-16t-5 A 6:1 € Dimensions in mm

SPEC VERSION LICENSE PAGE 3¢4229b833a653b73db51178a38d40486ee7c36b CC-BY 4.0 IronPixel Labs LLC 1/1

Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.