16t-5 Timing Pulley, GT2 datasheet (PDF)

Datasheet — 16t-5 Timing Pulley, GT2 by Milo

Open the PDF
16t-5 Timing Pulley, GT2Get the CAD model16t-5 Timing Pulley, GT2CC-GT2-DS-16t-5.pdf

Text of this datasheet

CC-GT2-DS-16t-5S revA Size datasheet - 16t-5

'?) CommunityCAD

GT2 timing pulley, 16 teeth, 5mm bore

Size datasheet: this size's values with their levels, conventions and sources.

For GT2 6 mm belts ona 5 mm

Part key gt2-pulleys-16t-5 Files 1 STEP AP214 (simplified) a 16t-5, hub end, 1:1 16t-5, side, 1.5:1 (hidden lines dashed)

Sym. Dimension Value Level dp Pitch diameter (the belt's pitch line) 10.19 L1-2 da Outside diameter (the band) 9.68 L1- 2 df Flange diameter 14.732 L1- 2 b Face width between the flanges 7.366 L1- 2 bf Width over the flanges 10.3% lo -1 L Overall length 14.2748 lo -1 dh Hub diameter 14.732 lo -1 M Set screw thread 3% lo -1 th Gates' hub length (recorded) 5.969% lo: 1 de Misumi's face diameter (recorded) Tk lo: 1

Modeled value: nominal, else the midpoint of min-max. < / 2: only that limit is given. * amber: one source (LO). c: a source value was corrected. Level - independent sources.

Gates' design manual, Misumi GPA 2GT and SDP/SI tables Page 1/2 GT2 timing pulley « 16t-5 - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC spec 304229b833a653b73db51178a38d40486ee7c36b

Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.

---

* CC-GT2-DS-16t-5S revA '?) CommunityCAD Size datasheet - 16t-5

Conventions + Makers’ tables: No published standard: Gates' design manual, Misumi's GPA 2GT tables and SDP/SI's catalog page, each its own lineage. Pitch and outside diameters agree at every size.

* Where makers differ: The largest stated flange, face width, overall length and hub, so the model covers every maker's pulley; each maker's value is on the page. 16t-5 and 20t-5 stand on one lineage, labelled single source.

¢ Band, flanges and hub: The toothed band is a plain cylinder at the outside diameter: Gates' groove profile is proprietary. Each flange (bf - b) / 2 thick, the hub L - bf long, computed. The flange rims, hub end and bore chamfered. Illustrative, checked for fit only.

« Set screws: Radial plain bores at the thread's nominal diameter, through the hub's wall at mid-hub: two at 90 degrees, one on 16 teeth (Gates' note). Their place along the hub is house.

Sources

Source Publisher Retrieved sha256

gates-Light-power-precision Gates (distributor copy, Maxiparts) 2026-11-05 ef9f602173db misumi-gpa-2gt MISUMI 2026-11-07 16a48c814d68 (kept outside the repo)

The whole series (verification map, corrections, drawings): CC-GT2-DS.

Gates' design manual, Misumi GPA 2GT and SDP/SI tables Page 2/2 GT2 timing pulley « 16t-5 - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC spec 304229b833a653b73db51178a38d40486ee7c36b

Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.