Neodymium block magnet, length x width x height, 15x4x4
Size drawing - 15x4x4 values on the views - enlarged 8:1
Dimension 15x4x4
Length, the longer side
Width, the other side Height, magnetised axis W=4 Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey under a value = its min-max, where the source gives both. L j < / = = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing). L1 = two or more independent sources agree: the release gate. LO = one source only: printed amber and marked *.
L=15
c = a source value was corrected; the datasheet says how. House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L1 3.
Notes
No published standard: values from the makers' stock lists (ADR 0034).
Every edge rounded r = the smallest dimension / 10, illustrative: sheet DO2. H=4
TITLE
'? CommunityCAD Size drawing, 15x4x4
STANDARDS FOLLOWED FAMILY / DETAIL
No published standard (makers' stock lists) Neodymium block magnet - 15x4x4 SHEET REV SCALE PROJECTION UNITS CC-MAGBLOCK-SZ-15x4x4 A 8:1 € Dimensions in mm SPEC VERSION LICENSE PAGE d7051ebac2ed98fe8d173be9178a54b140ecab68 CC-BY 4.0 IronPixel Labs LLC 1/
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.