ISO 2936 hexagon socket screw key (hex key), s 1.5
Size drawing - s 1.5 values on the views - enlarged 2:1
1.5
1.49 1.48-1.50
Width across flats (the size)
1.655 1.63-1.68
Width across corners
46.5 44.5-46.5
am Long arm, standard
2 = 15.5 r = 1.5 (s max) 11 L — Longarm, long (-L) ee .
91.5 89.5-91.5
11 XL Long arm, extra-long (-XL)
15.5 13.5-15.5
12 Short arm
N= 46.5 44.5-46.5
Source levels
Main value = the modeled value (nominal, else the middle of min-max).
Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing).
L1 = two or more independent sources agree: the release gate.
LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L2 10.
Notes
Sizes are the width across flats s; the standard arm is drawn, -L and -XL differ in 11. Grey under a length: its limits (nominal plus Table 1's deviations).
r = s max, the bend's inner radius; the bend is 90° (ADR 0102, not tabled). Section and ends are house conventions, sheet D02.
TITLE
'? CommunityCAD Size drawing, s 1.5
STANDARDS FOLLOWED FAMILY / DETAIL
ISO 2936:2014 Hexagon socket screw key - s 1.5 SHEET REV SCALE PROJECTION UNITS CC-1802936-SZ-1.5 A 2:1 € Dimensions in mm SPEC VERSION LICENSE PAGE 38961b18cdce81745e7c92eee15d7cbafe461574 CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.