CC-DIN6799-DS-15 revA Size datasheet - 15
'?) CommunityCAD
DIN 6799 15 E-clip
Size datasheet: this size's values with their levels, conventions and sources.
For a15 mm shaft groove Part key din6799-d15 rT Files 1 STEP AP214 (simplified) 15, front view, 1:1 15, view from above, 0.75:1 Sym. Dimensi Value Level s Clip thickness 1.5 L1- 2 d3 Outer diameter, installed (max) < 29.4 L1- 2 d2 Groove diameter (the size) 15 L1- 2 a Mouth width, loose (not modeled) 12.61 L1- 2 d1 Shaft diameter range 20* lo-1 16-24 m Groove width 1.55 L1- 2 n Groove edge margin (min) >3 L1- 2
Modeled value: nominal, else the midpoint of min-max. s / =: only that limit is given. * amber: one source (LO). c: a source value was corrected. Level - independent sources.
DIN 6799:2017-06 Page 1/2 Retaining washer for shafts (E-clip) - 15 - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC spec c964ffabe3a887708eb3e6e0cal8e3b2147b3b9c
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
---
'?) CommunityCAD CC-DIN6799-DS-15 rev A
Size datasheet - 15
Conventions « Values: Modeled installed on the shaft: d2 (the lug-tip circle) and s at their nominals, d3 at its max (a single limit). a is the loose clip's mouth width: tabulated, not modeled.
« Outline: Three round-tipped lugs on @ d2, pockets between them, jaws opening at 15° and rounded arm ends, all in proportion to the radial depth h (sheet DO2).
e Edges, faces and markings: Sharp edges, flat parallel faces, no markings. Material and finish are metadata only: one model per size. « Groove and shaft: The groove m, n and the shaft range d1 are tabulated for your design; they aren't modeled.
Sources
Source Publisher Retrieved sha256 fasteners-eu-din6799 fasteners.eu 2026-10-30 273a33F2bFdF fasten-it-din6799 fasten.it 2026-10-30 afee133d9734
The whole series (verification map, corrections, drawings): CC- DIN6799-DS.
DIN 6799:2017-06 Page 2/2 Retaining washer for shafts (E-clip) - 15 - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC spec c964ffabe3a887708eb3e6e0cal8e3b2147b3b9c
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.