DIN 988 shim ring, 13x19
Size drawing - 13x19 values on the views - h = 1 shown (the thickest file) - enlarged 5:1
Sym. Dimensi x19
13.14 13.05-13.23
di Bore, D12 (band middle)
18.83 18.725-18.935
D Outside, d12 (band middle!
d2 = 18.83 ‘ )
18.725-18.935 ,
6.1 thickness, a file each e 0.2 0.3 0.5
1 mm
Source levels
Main value = the modeled value (nominal, else the middle of min-max).
Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing).
L1 = two or more independent sources agree: the release gate.
LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L1 2.
Notes
d1 and d2: the middle of the D12 / d12 band; grey = the band's limits (ISO 286-2). h: nominal = max; @ = a file at that thickness. Sharp edges: house conventions, D02.
d1 = 13.14 13.05~13.23
d2 = 18.83 18.725-18.935
View from above
TITLE
'? CommunityCAD Size drawing, 13x19
STANDARDS FOLLOWED FAMILY / DETAIL
DIN 988:1990-03 (as tabulated) - ISO 286-2 (D12, d12) Shim ring - 13x19
SHEET REV SCALE PROJECTION UNITS CC-DIN988-SZ-13x19 A 5:11 € Dimensions in mm SPEC VERSION LICENSE PAGE 091135b88172de29a46c1a2ac9916F747F26acf7 CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.