ISO 4200 plain-end steel tube, 13.5x2
Size drawing - 13.5x2 values on the views - enlarged 8:1
Dimension
Outside diameter
Wall thickness
Source levels
Main value = the modeled value (nominal, else the middle of min-max).
Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing). L1 = two or more independent sources agree: the release gate.
LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule.
This size's values: L1 2. Notes Every size is a table 2 tube of series 1, its designation D x T (ADR 0129).
TITLE
'? CommunityCAD Size drawing, 13.5x2
STANDARDS FOLLOWED
ISO 4200:1991 table 2, EN 10220 (through free tables)
FAMILY / DETAIL
Plain-end steel tube - 13.5x2
SHEET
CC-1S04200-SZ-13.5x2 A 8:1
REV SCALE PROJECTION
UNITS
Dimensions in mm
SPEC VERSION
LICENSE
b4ef85ef5b77026138e5e14e5d8d82b0c7d8défe CC-BY 4.0 IronPixel Labs LLC
PAGE
1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.