ISO 2795 sintered bronze bush, flanged, 10x16x22x3
Size drawing - 10x16x22x3 values on the views - L = 10 shown; lengths 8, 10, 16 - enlarged 2:1
10x16x22x3, 45* |S 0.8% 0.75 0.75 8, 10, 16
Source levels
Main value = the modeled value (nominal, else the middle of min-max).
Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing).
L1 = two or more independent sources agree: the release gate.
LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule. rf = 0.75 house This size's values: L1 4 - LO 3.
Notes
Sizes are d x D x Dfl x e. L is the overall length, flange included.
c = 0.75 house, a = 45°* L: lengths both makers list, each its own file; the views show the middle one.
C andr: SELFOIL's drawing maxima. c and rf: what's modeled, capped at wall / 4 (house).
L=10 shown lengths 8-16
Dfl = 22
View from above
TITLE
'? CommunityCAD Size drawing, 10x16x22x3
STANDARDS FOLLOWED FAMILY / DETAIL ISO 2795:2020 Sintered bronze bush, flanged - 10x16x22x3 SHEET REV SCALE PROJECTION UNITS
CC-1802795F-SZ-10x16x22x3 |A 2:1 € Dimensions in mm
SPEC VERSION LICENSE PAGE 70b2bf787ea8F07904ce030af50bcaf231F0c68F CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.