DIN 988 shim ring, 10x16
Size drawing - 10x16 values on the views - h = 1.5 shown (the thickest file) - enlarged 5:1
Sym. Dimensi 10x
10.115 10.04-10.19
di Bore, D12 (band middle)
15.86
' . Outside, d12 (band middle)
d2 = 15.86 15.77-15.95 15.77-15.95
T 6.1 mm thickness, a file each e
0.2 mm 0.3 mm 6.5 mm 1 mm
1.2 mm
1.5 mm
Source levels Main value = the modeled value (nominal, else the middle of min-max). d1= 10.115 Grey under a value = its min-max, where the source gives both. 10.04-1019 = / = = the source gives only that limit, modeled at it. ref = reference. L2 = the standard itself (or its complete free preview, or the maker's drawing). L1 = two or more independent sources agree: the release gate. LO = one source only: printed amber and marked *. c = a source value was corrected; the datasheet says how. House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L1 2. Notes d1 and d2: the middle of the D12 / d12 band; grey = the band's limits (ISO 286-2). h: nominal = max; @ = a file at that thickness. Sharp edges: house conventions, D02.
d2 = 15.86 18.77-15.95
View from above
TITLE
'? CommunityCAD Size drawing, 10x16
STANDARDS FOLLOWED FAMILY / DETAIL
DIN 988:1990-03 (as tabulated) - ISO 286-2 (D12, d12) Shim ring - 10x16
SHEET REV SCALE PROJECTION UNITS CC-DIN988-SZ-10x16 A 5:1 € Dimensions in mm
SPEC VERSION LICENSE PAGE cfd05b053c736a4F15ba3030aa41febd40cdc205 CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
