* CC-1S02795-DS-10x14 revA '?) CommunityCAD Size datasheet - 10x14
ISO 2795 10x14 sintered bronze bush
Size datasheet: this bush's values with their levels, conventions and sources.
For 10 mm shafts ina 14 mm housing bore
Part key iso2795-c-10x14x<L>
Files 3 STEP AP214 (simplified), one per length
Lengths 8mm, 10 mm, 16 mm
10x14, front view, 2:1 10x14, view from above, 1.5:1
Dimension Inside diameter D Outside diameter 14 c Edge chamfer, maximum < 0.3
a Chamfer angle from the axis, degrees 45 L1- 2
Modeled value: nominal, else the midpoint of min-max. : only that limit is given, modeled at it. * amber: one source (LO). c: a source value was corrected. house: a stated rule. Level - independent sources.
ISO 2795:2020 Page 1/2 Sintered bronze bush - 10x14 - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC spec 70b2bf787ea8F07904ce030af50bcaf231F0c68F
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
---
'?) CommunityCAD
CC-1S02795-DS-10x14 revA Size datasheet - 10x14
Lengths
L Status Part key
8 built - - is02795-c-10x14x8 10 built - - is02795-c-10x14x10 16 built - - is02795-c-10x14x16
One STEP file per length, one detail level.
Conventions . series.
Values: d, D and L at their nominals: the sources give tolerance classes (before fitting G7/G8 after press -fitting), not limits. The model is the nominal part before fitting, concentric.
Chamfers: On the bore and outside edges at both ends: Table 2's maximum C for the wall (D tan(q) across it; a from Figure 1. Capped at a quarter of the wall; the cap is the owner's rule.
bronze, oil impregnated: render material only.
Sources Source Publisher Retrieved iso2795-2020-sample ISO (preview published by iTeh Standards) 2026-10-30 iso2795-2020-sample-figures ISO (preview published by iTeh Standards) 2026-10-30 bowman-iso2795-plain Bowman International 2026-10-30 selfoil-iso2795-plain SELFOIL (Spain) 2026-10-30
The whole series (verification map, corrections, drawings): CC-ISO2795-Ds.
ISO 2795:2020 Sintered bronze bush - 10x14 - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
Edition and scope: ISO 2795:2020, Tables 1 and 2 from its complete free preview. Every Table 1 row with d 2 to 12, normal and thin- wall
bore, s7/s8 outside, js13 length; H7 or H8 bore
- d)/2, modeled at the limit, along the axis, and C
Frame: Z the axis, one end face at Z = 0, the other at Z = L. The form is symmetric, so either end works. Grooves, holes, markings, finish: None modeled: standard parts are plain, and a press-fit part carries no CommunityCAD mark. Sintered
sha256
0aa42b950205 (kept outside the repo) 0aa42b950205 (kept outside the repo) 195596e71b6F
8309193495 (kept outside the repo)
Page 2/2 spec 70b2bf787ea8F07904ce030af50bcaf231F0c68F