EN 10056 equal leg steel angle, 100x100x8
Size drawing - 100x100x8 values on the views - enlarged 1.5:1
Leg length
Leg thickness
Root radius
Toe radius
Sectional area, cm?
Source levels
Main value = the modeled value (nominal, else the middle of min-max).
Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing). L1 = two or more independent sources agree: the release gate.
LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L15.
Notes
r2 = 11/2 at every size; * where only roymech's table states it (ADR 0114 row 8). Ais the tables' area, a check on the model, not modeled (cm?).
TITLE
'? CommunityCAD Size drawing, 100x100x8
STANDARDS FOLLOWED FAMILY / DETAIL
EN 10056-1:2017 (through free tables) Equal leg steel angle - 100x100x8 SHEET REV SCALE PROJECTION UNITS CC-EN10056-SZ-100x100x8 A 1.5:1 € Dimensions in mm SPEC VERSION LICENSE PAGE 1fa02885ed33ccOe2d8b2F73686ba418650b8d17 CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.