EN 10219 steel hollow section, 100x100x6.3
Size drawing - 100x100x6.3 values on the views - enlarged 1.5:1
Sym. | Dimensi |00x100x6.3)
Outside height 166
Outside width ase
Wall thickness 6.3
15.75 12.60-18.90
Outside corner radius
ro = 15.75 i Inside corner radius, ro - T 9.45 refx
12.60-18.90
Source levels
Main value = the modeled value (nominal, else the middle of min-max).
Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing).
L1 = two or more independent sources agree: the release gate.
LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L1 4 - LO 1.
Notes
ro: the midpoint of the external corner band, its min-max in brackets (ADR 0120 row 3). ri: internal corner not specified by the standard, concentric (ADR 0120 row 5).
ri = 9.45 ref*
TITLE
'? CommunityCAD Size drawing, 100x100x6.3
STANDARDS FOLLOWED FAMILY / DETAIL
EN 10219-2 (through free tables) Steel hollow section - 100x100x6.3 SHEET REV SCALE PROJECTION UNITS CC-EN10219-SZ-100x100x6.3 |A 1.5:1 € Dimensions in mm SPEC VERSION LICENSE PAGE 7cOddbd21b173b035879e140745122614bF45521 CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.