CC-ARCASWISS-DS-100 rev A Size datasheet - 100 mm
'?) CommunityCAD
Arca-Swiss type 100 mm Arca-Swiss type plate
Size datasheet: this size's values with their levels, conventions and sources.
Part key arca-swiss-100 Files 1 STEP AP214 (simplified)
— [==]
100 mm, front view, 1:5 100 mm, view from above, 1:5
Sym. Dimensi L Plate length (Leofoto, Sunwayfoto) 100 L1- 2 T Plate thickness (one maker's) 10* lo- 1 wp Width as the makers state it, mm 38 l1-2 w Dovetail width, in (RRS) 1.500 wt Post-finish width at hg, in (RRS) 1.449
1.446-1.452 a Flank angle, ° (RRS) 45.0 ap Flank angle as Acratech and ProMediaGear state it, ° 45 hg Gauge height, in (RRS, basic) 0.100 hs Side face height, in (RRS) 0.075 h Dovetail height, in (RRS) > 0.190 r Bottom corner radius, in (RRS) 0.063 fl Clamping face flatness, in (RRS) < 0.001 pea | D Slot width = 1/4-20 socket D (house) 6.35 house ic Counterbore width, 2.2 D (house) 13.97 house e Slot centres, L - 2c (house) 72.06 house mn Mark side (house) 7.325 house
Modeled value: nominal, else the midpoint of min-max. < / 2: only that limit is given, modeled at it. * amber: one source (LO). house: a stated house rule. Level - independent sources.
RRS 1.5 in Dovetail Standard (maker drawing); no published standard Page 1/2 Camera plate - 100 mm - Dimensions in mm - CC-BY 4.0, IronPixel Labs LLC spec 304229b833a653b73db51178a38d40486ee7c36b
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
---
CC-ARCASWISS-DS-100 rev A Size datasheet - 100 mm
'?) CommunityCAD
Conventions
e Profile: No published standard. The dovetail is Really Right Stuff's 1.5 in drawing: the clamping face, corner rounds r, side faces to hs, flanks at a to the body's underside at h (its MIN, at the limit), the body full width above. The post-finish width at hg follows and lies in its band. Flatness is data only.
« Lengths and thickness: The plain universal plates Leofoto and Sunwayfoto both list (62 and 100 mm). The thickness is the one maker's stated value at that length (LO).
« Slot and counterbore: One through slot along X, the ISO 1222 1/4-20 socket's D wide; a counterbore from the clamping face up to h, 2.2 D wide (the camera screw's head rule); both with round ends, their centres L - 2c apart. No screw, stops or pads.
« Ends, mark and finish: Square ends with the profile's own corners; other edges sharp. The CommunityCAD mark recessed 0.3 mm in the clamping face's -Y strip. Matte black anodised aluminium (render only).
Sources
Source Publisher Retrieved sha256
rprs-dovetail-standard Really Right Stuff 2026-10-31 3d447b6c1a64 (kept outside the repo) Leofoto-plates Leofoto 2026-11-04 b370685bbc8a
sunwayfoto-plates Sunwayfoto 2026-11-04 62785ac10513
acratech-dovetail-post Acratech 2026-11-05 730a808eF495 promediagear-arca-plates ProMediaGear 2026-11-05 1058a74ac876
The whole series (verification map, drawings): CC-ARCASWISS-DS.
RRS 1.5 in Dovetail Standard (maker drawing); no published standard Page 2/2 Camera plate - 100 mm - Dimensions in mm - CC-BY 4.0, IronPixel Labs LLC spec 304229b833a653b73db51178a38d40486ee7c36b
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
