10 mm Shaft Collar (Set Collar), Form A (Set-screw Hole), DIN 705

An M5 set-screw hole holds this 10 mm shaft collar (DIN 705, form A, set-screw hole) on a 10 mm shaft; 20 mm outside, 10 mm wide. It comes in simplified and threaded STEP files.

How these parts are made, and what the levels mean: read the method

• Also searched as: 10 mm collar
• Model id: din705-a-d10
• Standard: DIN 705:2019 · size 10 mm

Files

Part key	Simplified	Threaded
din705-a-d10	STEP	STEP

Dimensions

Symbol	Name	min	nom	max	Modeled	Rule	Level
d1	Bore diameter		10		10	nominal	L1
d2	Outside diameter		20		20	nominal	L1
b	Width		10		10	nominal	L1
d3	Set-screw thread		5		5	nominal	L1
l_s	Set-screw length		8		8	nominal	L1

Drawing

As a PDF: CC-DIN705-SZ-10.pdf.

The 10 mm form A shaft collar beside the 8 mm and the 12 mm

The 10 mm is number 6, counting from the smallest, of the 11 DIN 705 shaft collars published here, from 3 mm to 20 mm.

• Bore diameter (d1): 10 mm on the 10 mm form A shaft collar, against 8 mm on the 8 mm and 12 mm on the 12 mm.
• Outside diameter (d2): 20 mm on the 10 mm form A shaft collar, against 16 mm on the 8 mm and 22 mm on the 12 mm.
• Width (b): 10 mm on the 10 mm form A shaft collar, against 8 mm on the 8 mm and 12 mm on the 12 mm.
• Set-screw thread (d3): 5 mm on the 10 mm form A shaft collar, against 4 mm on the 8 mm and 6 mm on the 12 mm.
• Set-screw length (l_s): 8 mm on the 10 mm form A shaft collar, against 6 mm on the 8 mm and 8 mm on the 12 mm.

The 10 mm form A shaft collar in its other forms

• 10 mm Shaft Collar (Set Collar), Form B (Taper-pin Hole), DIN 705: taper-pin diameter 3 mm, no set-screw thread (d3) or set-screw length (l_s).

Other sizes

• One size smaller: 8 mm Shaft Collar (Set Collar), Form A (Set-screw Hole), DIN 705, 8 mm bore, 16 mm OD, 8 mm wide, M4 set screw.
• One size larger: 12 mm Shaft Collar (Set Collar), Form A (Set-screw Hole), DIN 705, 12 mm bore, 22 mm OD, 12 mm wide, M6 set screw.

Documents

• CC-DIN705-DS-10.pdf: 10 datasheet: values with levels, sources
• CC-DIN705-SZ-10.pdf: 10 drawing: this size's values on the views
• parts.json: the part record of this size (the platform contract)

Sources

dinmark-din705, fasten-it-din705, maedler-din705. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.