. CC-1S01234-DS-0.8revA '?) CommunityCAD Size datasheet - 0.8
ISO 1234 split pin, size 0.8
Size datasheet: the split pin for a 0.8 mm hole. This size's values with their levels, its lengths, conventions and sources.
Size For a 0.8 mm hole; pin
(>) WV @0.65 mm, eye 1.3 x 2.4 mm Lengths 7 generated, | = 5-16 Files 7 STEP AP214 (one detail level)
0.8 x 10, front view, 4:1
Dimension
Pin diameter, across both legs
a Extended prong (long leg past short) b Eye length, bearing point to eye end ic Eye width, outside
Modeled value: the midpoint of min-max. ref: reference value. * amber: one source (LO). Level - independent sources.
ISO 1234:1997 Page 1/2 Split pin - 0.8 - Dimensions in mm - CC-BY 4.0, IronPixel Labs LLC spec 4aeSbf9e66e8308247edfcSddd7a850ae355fc17
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
---
'?) CommunityCAD CC-1S801234-DS-0.8revA
Size datasheet - 0.8
Lengths | Status Part key 5 built - - is01234-d0-8x5 6 built - - is01234-d0-8x6 8 built - - is01234-d0-8x8 10 built - - is01234-d0-8x10 12 built - - is01234-d0-8x12 14 built = - is01234-d0-8x14 16 built - - is01234-d0-8x16
One STEP file per length, one detail level.
Conventions
« d,aandc at their midpoints; b at its reference value (ADR 0104).
« band! measured from the bearing point, where the eye meets the hole.
« Teardrop eye of swept half-round wire (#601 item 2).
« Both legs square cut: end form not specified by the standard (#601 item 3). « No markings; material and finish are metadata only.
Sources Source Publisher Retrieved sha256 iso1234-1997-sample ISO (preview published by iTeh Standards) 2026-10-30 890178a1e595 (kept outside the repo) fasten-it-iso1234 fasten.it 2026-10-30 a79d2411617a fasteners-eu-iso1234 fasteners.eu 2026-10-30 d5ca18516d5c amesweb-iso1234 AMESweb 2026-10-30 8f5042F7e5F4
The whole series (verification map, drawings): CC-ISO1234-Ds.
ISO 1234:1997 Page 2/2 Split pin - 0.8 - Dimensions in mm - CC-BY 4.0, IronPixel Labs LLC spec 4aeSbf9e66e8308247edfcSddd7a850ae355fc17
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.