40 I-type slot 8 Slot Cover
The 40 I-type slot 8 slot cover (Extrusion slot cover): face width 8 mm, depth 11 mm, leg width 9.4 mm. Available as 14 lengths from 100 to 2000 mm, each as simplified STEP.

How these parts are made, and what the levels mean: read the method
- Also known as: 40 I-type slot 8 slot cover strip, 40 I-type slot 8 T-slot cover, 40 I-type slot 8 extrusion slot filler, 40 I-type slot 8 panel holder, 40 I-type slot 8 x 100 to 40 I-type slot 8 x 2000
- Model id:
extrusion-slot-covers-40-i8
- Standard: Extrusion slot cover · size 40 I-type slot 8
Lengths
| Length (mm) | Part key | Simplified |
|---|
| 100 | extrusion-slot-covers-40-i8x100 | STEP |
| 150 | extrusion-slot-covers-40-i8x150 | STEP |
| 200 | extrusion-slot-covers-40-i8x200 | STEP |
| 250 | extrusion-slot-covers-40-i8x250 | STEP |
| 300 | extrusion-slot-covers-40-i8x300 | STEP |
| 350 | extrusion-slot-covers-40-i8x350 | STEP |
| 400 | extrusion-slot-covers-40-i8x400 | STEP |
| 450 | extrusion-slot-covers-40-i8x450 | STEP |
| 500 | extrusion-slot-covers-40-i8x500 | STEP |
| 600 | extrusion-slot-covers-40-i8x600 | STEP |
| 750 | extrusion-slot-covers-40-i8x750 | STEP |
| 1000 | extrusion-slot-covers-40-i8x1000 | STEP |
| 1500 | extrusion-slot-covers-40-i8x1500 | STEP |
| 2000 | extrusion-slot-covers-40-i8x2000 | STEP |
Dimensions

| Symbol | Name | min | nom | max | Modeled | Rule | Level |
|---|
| b | Face width | | 8 | | 8 | nominal | L1 |
| h | Depth | | 11 | | 11 | nominal | L1 |
| b1 | Leg width | | 9.4 | | 9.4 | nominal | L0 (nom: one source) |
| b2 | Open-side gap | | 6.6 | | 6.6 | nominal | L0 (nom: one source) |
Drawing

As a PDF: CC-SLOTCOVER-SZ-40-i8.pdf.
The 40 I-type slot 8 slot cover beside the 30 B-type slot 8 and the 40 slot 10
The 40 I-type slot 8 is number 3 of the 5 Extrusion slot covers published here, listed from 20 B-type slot 6 to 45 slot 10.
- Face width (b): 8 mm on the 40 I-type slot 8 slot cover, against 8.3 mm on the 30 B-type slot 8 and 10 mm on the 40 slot 10.
- Depth (h): 11 mm on the 40 I-type slot 8 slot cover, against 9 mm on the 30 B-type slot 8 and 13 mm on the 40 slot 10.
- Leg width (b1): 9.4 mm on the 40 I-type slot 8 slot cover, against 10.2 mm on the 30 B-type slot 8 and 11 mm on the 40 slot 10.
- Open-side gap (b2): 6.6 mm on the 40 I-type slot 8 slot cover, against 5.6 mm on the 40 slot 10.
Other sizes
Conventions
- Simplified only: one solid. STEP AP214, millimetres, the section in XY centred on X = 0, the face's outside at Y = 0, the legs toward -Y, the strip along +Z from its end face at Z = 0.
Documents
Sources
item-cover-profile-8, kipp-k1054. Full citations: the method page and this size's datasheet.
Found an error? Use the feedback section on this page.
Comments
Sign in to leave a comment.
Loading comments...