30 B-type slot 8 inline-2 Extrusion Joining Plate

STEP · STL Supports CommunityCAD0 downloads
30 B-type slot 8 inline-2 Extrusion Joining Plate
1 / 6

30 B-type slot 8 inline-2 Extrusion Joining Plate

2 holes of 7 mm through a plate 3.2 mm thick, 55 mm by 25 mm: the 30 B-type slot 8 inline-2 extrusion joining plate, as simplified STEP files.

30 B-type slot 8 inline-2 extrusion joining plate, Extrusion joining plate

How these parts are made, and what the levels mean: read the method

  • Also known as: 30 B-type slot 8 inline-2 joining strip, 30 B-type slot 8 inline-2 corner plate, 30 B-type slot 8 inline-2 T plate, 30 B-type slot 8 inline-2 flat connector plate
  • Model id: extrusion-joining-plates-b8-inline-2
  • Standard: Extrusion joining plate · size 30 B-type slot 8 inline-2

Files

Part keySimplified
extrusion-joining-plates-b8-inline-2STEP

Dimensions

Dimension symbols for 30 B-type slot 8 inline-2 extrusion joining plates (Extrusion joining plate)

SymbolNameminnommaxModeledRuleLevel
lLength5555nominalL0 (nom: one source)
wLeg width2525nominalL0 (nom: one source)
tThickness3.23.2nominalL0 (nom: one source)
dHole diameter77nominalL0 (nom: one source)
nNumber of holes22nominalL0 (nom: one source)
pHole spacing3030nominalL0 (nom: one source)
rCorner radius22nominalL0 (nom: one source)

Drawing

Drawing of the 30 B-type slot 8 inline-2 extrusion joining plate with its values (Extrusion joining plate)

As a PDF: CC-JOINPLATE-SZ-b8-inline-2.pdf.

The 30 B-type slot 8 inline-2 extrusion joining plate beside the 20 V-slot t-5 and the 30 B-type slot 8 inline-4

The 30 B-type slot 8 inline-2 is number 10 of the 21 Extrusion joining plate extrusion joining plates published here, listed from 20 B-type slot 6 inline-2 to 45 slot 10 inline-4.

  • Length (l): 55 mm on the 30 B-type slot 8 inline-2 extrusion joining plate, against 60 mm on the 20 V-slot t-5 and 115 mm on the 30 B-type slot 8 inline-4.
  • Leg width (w): 25 mm on the 30 B-type slot 8 inline-2 extrusion joining plate, against 20 mm on the 20 V-slot t-5 and 25 mm on the 30 B-type slot 8 inline-4.
  • Thickness (t): 3.2 mm on the 30 B-type slot 8 inline-2 extrusion joining plate, against 4 mm on the 20 V-slot t-5 and 3.2 mm on the 30 B-type slot 8 inline-4.
  • Hole diameter (d): 7 mm on the 30 B-type slot 8 inline-2 extrusion joining plate, against 5.1 mm on the 20 V-slot t-5 and 7 mm on the 30 B-type slot 8 inline-4.
  • Number of holes (n): 2 on the 30 B-type slot 8 inline-2 extrusion joining plate, against 5 on the 20 V-slot t-5 and 4 on the 30 B-type slot 8 inline-4.
  • Hole spacing (p): 30 mm on the 30 B-type slot 8 inline-2 extrusion joining plate, against 20 mm on the 20 V-slot t-5 and 30 mm on the 30 B-type slot 8 inline-4.
  • Corner radius (r): 2 mm on the 30 B-type slot 8 inline-2 extrusion joining plate, the same on the 30 B-type slot 8 inline-4.

Other sizes

Conventions

  • Simplified only: one solid. STEP AP214, millimetres, the face on the profile at Z = 0, the outer face at Z = t; inline plates along +X from a corner, L plates with the outer corner at the origin, T plates with the bar's outer edge on Y = 0.
  • The CommunityCAD mark recessed 0.3 mm in the outer face, clear of holes and edges, illustrative.

Documents

Sources

misumi-sheet-metal-plates. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-JOINPLATE-SZ-b8-inline-2.pdf

Extrusion joining plate, inline, L and T, b8-inline-2 Size drawing - b8-inline-2 values on the views - enlarged 3:1 holes: n = 2*, d = 7* Leg width Thickness Hole diameter Number of holes Hole spacing Corner radius Source levels Main value = the modeled value (nominal, else the middle of min-max).…

View full datasheet →

docs/CC-JOINPLATE-DS-b8-inline-2.pdf

'?) CommunityCAD CC-JOINPLATE-DS-b8-inline-2 rev A Size datasheet - b8-inline-2 30 B-type slot 8 inline plate, 2 holes (extrusion joining plate) Size datasheet: this size's values with their levels, conventions and sources. For joining 30 B-type slot 8 extrusions O oO O a ——_—_=_a_ay Part key…

View full datasheet →