80x80 I-type slot 8 Extrusion End Cap

STEP · STL Supports CommunityCAD0 downloads
80x80 I-type slot 8 Extrusion End Cap
1 / 6

80x80 I-type slot 8 Extrusion End Cap

80 mm by 80 mm over its face, 4 mm thick at the seat: the 80x80 I-type slot 8 extrusion end cap, as simplified STEP files.

80x80 I-type slot 8 extrusion end cap, Extrusion end cap

How these parts are made, and what the levels mean: read the method

  • Also known as: 80x80 I-type slot 8 profile end cap, 80x80 I-type slot 8 T-slot end cover, 80x80 I-type slot 8 aluminium extrusion end plate
  • Model id: extrusion-end-caps-i8-80x80
  • Standard: Extrusion end cap · size 80x80 I-type slot 8

Files

Part keySimplified
extrusion-end-caps-i8-80x80STEP

Dimensions

Dimension symbols for 80x80 I-type slot 8 extrusion end caps (Extrusion end cap)

SymbolNameminnommaxModeledRuleLevel
aCap width8080nominalL1
hCap height8080nominalL1
tSeat thickness44nominalL0 (nom: one source)

Drawing

Drawing of the 80x80 I-type slot 8 extrusion end cap with its values (Extrusion end cap)

As a PDF: CC-ENDCAP-SZ-i8-80x80.pdf.

The 80x80 I-type slot 8 extrusion end cap beside the 40x80 I-type slot 8 and the 40x40 slot 10

The 80x80 I-type slot 8 is number 10 of the 16 Extrusion end caps published here, listed from 20x20 B-type slot 6 to 90x90 slot 10.

  • Cap width (a): 80 mm on the 80x80 I-type slot 8 extrusion end cap, against 40 mm on the 40x80 I-type slot 8 and 40 mm on the 40x40 slot 10.
  • Cap height (h): 80 mm on the 80x80 I-type slot 8 extrusion end cap, against 80 mm on the 40x80 I-type slot 8 and 40 mm on the 40x40 slot 10.
  • Seat thickness (t): 4 mm on the 80x80 I-type slot 8 extrusion end cap, against 4 mm on the 40x80 I-type slot 8 and 3 mm on the 40x40 slot 10.

Other sizes

Conventions

  • Simplified only: one solid, plate and plugs. STEP AP214, millimetres, the back face (on the profile's end) at Z = 0, the outer face at Z = t, the plugs toward -Z, the outline centred on the origin.
  • The cross plugs on the back, the face's edge round and the recessed CommunityCAD mark are illustrative, not any maker's design; the plugs are sized to the profile's core bore and measured only for fit.

Documents

Sources

item-cap8, motedis-end-caps. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-ENDCAP-SZ-i8-80x80.pdf

Extrusion end cap, per profile cross-section, i8-80x80 Size drawing - i8-80x80 values on the views - enlarged 1.5:1 Dimension i8-80x80 Cap width Cap height Seat thickness Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey under a value = its min-max, where the…

View full datasheet →

docs/CC-ENDCAP-DS-i8-80x80.pdf

* CC-ENDCAP-DS-i8-80x80 rev A 0 CommunityCAD Size datasheet - i8-80x80 80x80 I-type slot 8 extrusion end cap Size datasheet: this size's values with their levels, conventions and sources. ap ap For 80x80 I-type slot 8 aluminium extrusion ends — Part key extrusion-end-caps-i8-80x80 Files 1 STEP…

View full datasheet →