30x30x4 Steel Angle, EN 10056-1
The 30x30x4 steel angle (EN 10056-1): leg length 30 mm, leg thickness 4 mm, root radius 5 mm. Available as 6 lengths from 100 to 6000 mm, each as simplified STEP.

How these parts are made, and what the levels mean: read the method
- Also searched as: 30x30x4 angle, 30x30x4 x 100 to 30x30x4 x 6000 angles
- Model id:
en10056-30x30x4
- Standard: EN 10056-1:2017 · size 30x30x4
Lengths
| Length (mm) | Part key | Simplified |
|---|
| 100 | en10056-30x30x4x100 | STEP |
| 250 | en10056-30x30x4x250 | STEP |
| 500 | en10056-30x30x4x500 | STEP |
| 1000 | en10056-30x30x4x1000 | STEP |
| 2000 | en10056-30x30x4x2000 | STEP |
| 6000 | en10056-30x30x4x6000 | STEP |
Dimensions

| Symbol | Name | min | nom | max | Modeled | Rule | Level |
|---|
| h | Leg length | | 30 | | 30 | nominal | L1 |
| t | Leg thickness | | 4 | | 4 | nominal | L1 |
| r1 | Root radius | | 5 | | 5 | nominal | L1 |
| r2 | Toe radius | | 2.5 | | 2.5 | nominal | L1 |
| A | Sectional area | | 2.27 | | 2.27 | nominal | L1 |
Drawing

As a PDF: CC-EN10056-SZ-30x30x4.pdf.
The 30x30x4 steel angle beside the 30x30x3 and the 30x30x5
The 30x30x4 is number 6 of the 46 EN 10056-1 steel angles published here, listed from 20x20x3 to 100x100x15.
- Leg length (h): 30 mm on the 30x30x4 steel angle, the same on the 30x30x3 and the 30x30x5.
- Leg thickness (t): 4 mm on the 30x30x4 steel angle, against 3 mm on the 30x30x3 and 5 mm on the 30x30x5.
- Root radius (r1): 5 mm on the 30x30x4 steel angle, the same on the 30x30x3 and the 30x30x5.
- Toe radius (r2): 2.5 mm on the 30x30x4 steel angle, the same on the 30x30x3 and the 30x30x5.
- Sectional area (A): 2.27 mm on the 30x30x4 steel angle, against 1.74 mm on the 30x30x3 and 2.78 mm on the 30x30x5.
Other sizes
Documents
Sources
arcelormittal-en10056, johnchorley-en10056, roymech-en10056. Full citations: the method page and this size's datasheet.
Found an error? Use the feedback section on this page.