m2-z60 Spur Gear, Spur gear

STEP · STL Supports CommunityCAD0 downloads
m2-z60 Spur Gear, Spur gear
1 / 7

m2-z60 Spur Gear, Spur gear

The m2-z60 spur gear: reference (pitch) diameter 120 mm, tip (outside) diameter 124 mm, root diameter 115 mm. Available as simplified STEP files.

m2-z60 spur gear, Spur gear

This model is CommunityCAD's own, drawn from KHK's published drawing; KHK did not make or endorse it.

How these parts are made, and what the levels mean: read the method

  • Also known as: m2-z60 metric spur gear, m2-z60 involute gear, m2-z60 straight cut gear, m2-z60 pinion
  • Model id: spur-gears-m2-z60
  • Standard: Spur gear · size m2-z60

Files

Part keySimplified
spur-gears-m2-z60STEP

Dimensions

Dimension symbols for m2-z60 spur gears (Spur gear)

SymbolNameminnommaxModeledRuleLevel
dReference (pitch) diameter120120nominalL2
daTip (outside) diameter124124nominalL2
dfRoot diameter115115nominalL0 (nom: one source)
dsBore diameter1515nominalL2
dhHub diameter6060nominalL2
bFace width2020nominalL2
lhHub width1010nominalL2
dh_hpcHPC's hub (boss) diameter5050nominalL0 (nom: one source)
ds_hpcHPC's bore2020nominalL0 (nom: one source)
LTotal length3030nominalL2

Drawing

Drawing of the m2-z60 spur gear with its values (Spur gear)

As a PDF: CC-SPUR-SZ-m2-z60.pdf.

The m2-z60 spur gear beside the m2-z50

The m2-z60 is the last of the 32 Spur gears published here, listed from m0.5-z15 to m2-z60.

  • Reference (pitch) diameter (d): 120 mm on the m2-z60 spur gear, against 100 mm on the m2-z50.
  • Tip (outside) diameter (da): 124 mm on the m2-z60 spur gear, against 104 mm on the m2-z50.
  • Root diameter (df): 115 mm on the m2-z60 spur gear, against 95 mm on the m2-z50.
  • Bore diameter (ds): 15 mm on the m2-z60 spur gear, the same on the m2-z50.
  • Hub diameter (dh): 60 mm on the m2-z60 spur gear, against 55 mm on the m2-z50.
  • Face width (b): 20 mm on the m2-z60 spur gear, the same on the m2-z50.
  • Hub width (lh): 10 mm on the m2-z60 spur gear, the same on the m2-z50.
  • HPC's hub (boss) diameter (dh_hpc): 50 mm on the m2-z60 spur gear, the same on the m2-z50.

Other sizes

Conventions

  • One level: one steel solid with true involute teeth. STEP AP214, millimetres, the bore on Z, the toothed band's plain face at z = 0, the hub toward +Z, a tooth centred on +X.
  • Nominal teeth: the tooth as thick as the space on the reference circle (pi m / 2), no backlash allowance; real gears are cut slightly thinner for backlash.
  • Plain bore only: KHK's tapped (set screw) and keyway variants are not modeled.

Documents

Sources

hpc-steel-spur-gears, khk-ss-spur-gears, misumi-eu-gears. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-SPUR-DS-m2-z60.pdf

'?) CommunityCAD CC-SPUR-DS-m2-z60 revA Size datasheet - m2-z60 Module 2, 60 teeth, spur gear Size datasheet: this size's values with their levels, conventions and sources. » m2-z60, end, 0.5:1 m2-z60, side (the blank), 0.5:1 (hidden lines dashed) da df ds dh Th dhH dsH ha hf c p Dimension…

View full datasheet →

docs/CC-SPUR-SZ-m2-z60.pdf

Involute spur gear, ISO 53 basic rack, m2-z60 Size drawing - m2-z60 values on the views - scale 1:1 @d = 120.00 Reference (pitch) diameter Tip (outside) diameter Root diameter Bore diameter (KHK, L2) Hub diameter (KHK, L2) Face width (KHK, L2) Hub width (KHK, L2) Total length (KHK, L2) HPC boss…

View full datasheet →