m0.5-z15 Spur Gear, Spur gear
The m0.5-z15 spur gear: reference (pitch) diameter 7.5 mm, tip (outside) diameter 8.5 mm, root diameter 6.25 mm. Available as simplified STEP files.

This model is CommunityCAD's own, drawn from KHK's published drawing; KHK did not make or endorse it.
How these parts are made, and what the levels mean: read the method
- Also known as: m0.5-z15 metric spur gear, m0.5-z15 involute gear, m0.5-z15 straight cut gear, m0.5-z15 pinion
- Model id:
spur-gears-m0-5-z15
- Standard: Spur gear · size m0.5-z15
Files
| Part key | Simplified |
|---|
spur-gears-m0-5-z15 | STEP |
Dimensions

| Symbol | Name | min | nom | max | Modeled | Rule | Level |
|---|
| d | Reference (pitch) diameter | | 7.5 | | 7.5 | nominal | L2 |
| da | Tip (outside) diameter | | 8.5 | | 8.5 | nominal | L2 |
| df | Root diameter | | 6.25 | | 6.25 | nominal | L0 (nom: one source) |
| ds | Bore diameter | | 3 | | 3 | nominal | L2 |
| dh | Hub diameter | | 8.5 | | 8.5 | nominal | L2 |
| b | Face width | | 5 | | 5 | nominal | L2 |
| lh | Hub width | | 11 | | 11 | nominal | L2 |
| L | Total length | | 16 | | 16 | nominal | L2 |
Drawing

As a PDF: CC-SPUR-SZ-m0.5-z15.pdf.
The m0.5-z15 spur gear beside the m0.5-z20
The m0.5-z15 is the first of the 32 Spur gears published here, listed from m0.5-z15 to m2-z60.
- Reference (pitch) diameter (d): 7.5 mm on the m0.5-z15 spur gear, against 10 mm on the m0.5-z20.
- Tip (outside) diameter (da): 8.5 mm on the m0.5-z15 spur gear, against 11 mm on the m0.5-z20.
- Root diameter (df): 6.25 mm on the m0.5-z15 spur gear, against 8.75 mm on the m0.5-z20.
- Bore diameter (ds): 3 mm on the m0.5-z15 spur gear, the same on the m0.5-z20.
- Hub diameter (dh): 8.5 mm on the m0.5-z15 spur gear, against 11 mm on the m0.5-z20.
- Face width (b): 5 mm on the m0.5-z15 spur gear, the same on the m0.5-z20.
- Hub width (lh): 11 mm on the m0.5-z15 spur gear, the same on the m0.5-z20.
- Total length (L): 16 mm on the m0.5-z15 spur gear, the same on the m0.5-z20.
Other sizes
Conventions
- One level: one steel solid with true involute teeth. STEP AP214, millimetres, the bore on Z, the toothed band's plain face at z = 0, the hub toward +Z, a tooth centred on +X.
- Nominal teeth: the tooth as thick as the space on the reference circle (pi m / 2), no backlash allowance; real gears are cut slightly thinner for backlash.
- Plain bore only: KHK's tapped (set screw) and keyway variants are not modeled.
Documents
Sources
khk-ss-spur-gears, misumi-eu-gears. Full citations: the method page and this size's datasheet.
Found an error? Use the feedback section on this page.
Comments
Sign in to leave a comment.
Loading comments...