37d-21.5 Gearmotor, Pololu
The 37d-21.5 gearmotor (Pololu gearmotor) has a gearbox 36.8 mm across and 21.5 mm long on a motor 30.7 mm long; the output is a 6 mm D-shaft, 5.4 mm across the flat and 22 mm long. It mounts by six M3 holes on a 31 mm circle. Modeled as simplified STEP files.

This model is CommunityCAD's own, drawn from Pololu's published drawing; Pololu did not make or endorse it.
How these parts are made, and what the levels mean: read the method
- Also known as: 37d-21.5 gear motor, 37d-21.5 geared DC motor, 37d-21.5 metal gearmotor
- Model id:
gearmotors-pololu-37d-21-5
- Standard: Pololu gearmotor · size 37d-21.5
Files
| Part key | Simplified |
|---|
gearmotors-pololu-37d-21-5 | STEP |
Dimensions

| Symbol | Name | min | nom | max | Modeled | Rule | Level |
|---|
| D | Gearbox diameter | | 36.8 | | 36.8 | nominal | L2 |
| Lg | Gearbox length | | 21.5 | | 21.5 | nominal | L2 |
| Lm | Motor length | | 30.7 | | 30.7 | nominal | L2 |
| Dm | Motor diameter | | 34.8 | | 34.8 | nominal | L2 |
| E | Shaft length | | 22 | | 22 | nominal | L2 |
| d | Shaft diameter | | 6 | | 6 | nominal | L2 |
| f | Shaft across the flat | | 5.4 | | 5.4 | nominal | L2 |
| B | Front boss diameter | | 12 | | 12 | nominal | L2 |
| h | Front boss height | | 6 | | 6 | nominal | L2 |
| eo | Shaft offset | | 7 | | 7 | nominal | L2 |
| dt | Mounting hole thread | | 3 | | 3 | nominal | L2 |
| nh | Number of mounting holes | | 6 | | 6 | nominal | L2 |
| th | Mounting hole depth | | 3 | | 3 | nominal | L2 |
| Pc | Mounting hole circle | | 31 | | 31 | nominal | L2 |
| ph | Adjacent hole spacing | | 15.5 | | 15.5 | nominal | L2 |
| Br | Rear boss diameter | | 7.8 | | 7.8 | nominal | L2 |
| hr | Rear boss height | | 1.6 | | 1.6 | nominal | L2 |
| lt | Terminal reach | | 5 | | 5 | nominal | L2 |
| pt | Terminal spacing | | 22.5 | | 22.5 | nominal | L2 |
| tw | Terminal width | | 2.9 | | 2.9 | nominal | L2 |
| tt | Terminal thickness | | 0.5 | | 0.5 | nominal | L2 |
| le | Encoder length | | 15.4 | | 15.4 | nominal | L2 |
| De | Encoder diameter | | 34 | | 34 | nominal | L2 |
Drawing

As a PDF: CC-GM-POLOLU-SZ-37d-21.5.pdf.
The 37d-21.5 gearmotor beside the 25d-27 and the 37d-24
The 37d-21.5 is number 7 of the 9 Pololu gearmotors published here, listed from 25d-17 to 37d-26.5.
- Gearbox diameter (D): 36.8 mm on the 37d-21.5 gearmotor, against 25 mm on the 25d-27 and 36.8 mm on the 37d-24.
- Gearbox length (Lg): 21.5 mm on the 37d-21.5 gearmotor, against 27 mm on the 25d-27 and 24 mm on the 37d-24.
- Motor length (Lm): 30.7 mm on the 37d-21.5 gearmotor, against 30.8 mm on the 25d-27 and 30.7 mm on the 37d-24.
- Motor diameter (Dm): 34.8 mm on the 37d-21.5 gearmotor, against 24.4 mm on the 25d-27 and 34.8 mm on the 37d-24.
- Shaft length (E): 22 mm on the 37d-21.5 gearmotor, against 12.5 mm on the 25d-27 and 22 mm on the 37d-24.
- Shaft diameter (d): 6 mm on the 37d-21.5 gearmotor, against 4 mm on the 25d-27 and 6 mm on the 37d-24.
- Shaft across the flat (f): 5.4 mm on the 37d-21.5 gearmotor, against 3.5 mm on the 25d-27 and 5.4 mm on the 37d-24.
- Front boss diameter (B): 12 mm on the 37d-21.5 gearmotor, against 7 mm on the 25d-27 and 12 mm on the 37d-24.
The 37d-21.5 gearmotor in its other versions
Other sizes
- One size smaller: 25d-27 Gearmotor, Pololu, 25 mm gearbox, 27 mm long, 4 mm D-shaft, Pololu and TT Motor data.
- One size larger: 37d-24 Gearmotor, Pololu, 36.8 mm gearbox, 24 mm long, 6 mm D-shaft, M3 mounting holes on a 31 mm circle, Pololu data.
Conventions
- Simplified only: seven solids, the gearbox, the shaft, the can, the end cap (with the encoder cover on the encoder version), two terminals and the polarity dot. STEP AP214, millimetres, the output shaft's axis on the gearbox's face at the origin, the shaft along +Z.
Documents
Sources
nfp-gm37-520, pololu-37d-gearmotors. Full citations: the method page and this size's datasheet.
Found an error? Use the feedback section on this page.
Comments
Sign in to leave a comment.
Loading comments...