25d-21-ENC Gearmotor, Pololu, With Encoder
Gearbox 21 mm long and 25 mm across, motor 30.8 mm: the 25d-21-ENC gearmotor (Pololu gearmotor, with encoder), with a 4 mm output shaft and two M3 holes. Its encoder adds 14.7 mm behind the motor. Download it as simplified STEP files.

This model is CommunityCAD's own, drawn from Pololu's published drawing; Pololu did not make or endorse it.
How these parts are made, and what the levels mean: read the method
- Also known as: 25d-21-ENC gear motor, 25d-21-ENC geared DC motor, 25d-21-ENC metal gearmotor
- Model id:
gearmotors-pololu-25d-21-enc
- Standard: Pololu gearmotor · size 25d-21
Files
| Part key | Simplified |
|---|
gearmotors-pololu-25d-21-enc | STEP |
Dimensions

| Symbol | Name | min | nom | max | Modeled | Rule | Level |
|---|
| D | Gearbox diameter | | 25 | | 25 | nominal | L2 |
| Lg | Gearbox length | | 21 | | 21 | nominal | L2 |
| Lm | Motor length | | 30.8 | | 30.8 | nominal | L2 |
| Dm | Motor diameter | | 24.4 | | 24.4 | nominal | L2 |
| E | Shaft length | | 12.5 | | 12.5 | nominal | L2 |
| d | Shaft diameter | | 4 | | 4 | nominal | L2 |
| f | Shaft across the flat | | 3.5 | | 3.5 | nominal | L2 |
| B | Front boss diameter | | 7 | | 7 | nominal | L2 |
| h | Front boss height | | 2.5 | | 2.5 | nominal | L2 |
| dt | Mounting hole thread | | 3 | | 3 | nominal | L2 |
| nh | Number of mounting holes | | 2 | | 2 | nominal | L2 |
| th | Mounting hole depth | | 6 | | 6 | nominal | L2 |
| e | Mounting hole offset | | 8.5 | | 8.5 | nominal | L2 |
| Br | Rear boss diameter | | 6.4 | | 6.4 | nominal | L2 |
| hr | Rear boss height | | 1.5 | | 1.5 | nominal | L2 |
| lt | Terminal reach | | 4.2 | | 4.2 | nominal | L2 |
| pt | Terminal spacing | | 18.1 | | 18.1 | nominal | L2 |
| tw | Terminal width | | 2.1 | | 2.1 | nominal | L2 |
| tt | Terminal thickness | | 0.3 | | 0.3 | nominal | L2 |
| le | Encoder length | | 14.7 | | 14.7 | nominal | L2 |
| De | Encoder diameter | | 25 | | 25 | nominal | L2 |
Drawing

As a PDF: CC-GM-POLOLU-SZ-25d-21.pdf.
The 25d-21-ENC gearmotor beside the 25d-19-ENC and the 25d-23-ENC
The 25d-21-ENC is number 3 of the 9 Pololu gearmotors published here, listed from 25d-17-ENC to 37d-26.5-ENC.
- Gearbox diameter (D): 25 mm on the 25d-21-ENC gearmotor, the same on the 25d-19-ENC and the 25d-23-ENC.
- Gearbox length (Lg): 21 mm on the 25d-21-ENC gearmotor, against 19 mm on the 25d-19-ENC and 23 mm on the 25d-23-ENC.
- Motor length (Lm): 30.8 mm on the 25d-21-ENC gearmotor, the same on the 25d-19-ENC and the 25d-23-ENC.
- Motor diameter (Dm): 24.4 mm on the 25d-21-ENC gearmotor, the same on the 25d-19-ENC and the 25d-23-ENC.
- Shaft length (E): 12.5 mm on the 25d-21-ENC gearmotor, the same on the 25d-19-ENC and the 25d-23-ENC.
- Shaft diameter (d): 4 mm on the 25d-21-ENC gearmotor, the same on the 25d-19-ENC and the 25d-23-ENC.
- Shaft across the flat (f): 3.5 mm on the 25d-21-ENC gearmotor, the same on the 25d-19-ENC and the 25d-23-ENC.
- Front boss diameter (B): 7 mm on the 25d-21-ENC gearmotor, the same on the 25d-19-ENC and the 25d-23-ENC.
The 25d-21-ENC gearmotor in its other versions
Other sizes
- One size smaller: 25d-19-ENC Gearmotor, Pololu, With Encoder, 25 mm gearbox, 19 mm long, 4 mm D-shaft, Pololu and TT Motor data.
- One size larger: 25d-23-ENC Gearmotor, Pololu, With Encoder, 25 mm gearbox, 23 mm long, 4 mm D-shaft, Pololu and TT Motor data.
Conventions
- Simplified only: seven solids, the gearbox, the shaft, the can, the end cap (with the encoder cover on the encoder version), two terminals and the polarity dot. STEP AP214, millimetres, the output shaft's axis on the gearbox's face at the origin, the shaft along +Z.
Documents
Sources
pololu-25d-gearmotors, ttmotor-gm25-370ca. Full citations: the method page and this size's datasheet.
Found an error? Use the feedback section on this page.
Comments
Sign in to leave a comment.
Loading comments...